Rear crankcase oil seal or rear main oil seal.

Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch

90405367-z 90405367 GU90405367 90 40 53 67
 9040 5367 9040.5367 90.40.53.67

Dimensions:
68mm OD

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

Dimensions:
1 litre

Full workshop manual for ABS equipped V7 III models covering maintenance, overhaul and detailed repair. Note that this manual does not include detailed engine overhaul

Includes tolerances for many parts, maintenance schedule and exploded diagrams. This is a comb bound reprint

2Q000297

Dimensions:
A4, 320 pages black and white

Guzzi Base Workshop Manual for all V35 & 50 models. 134 pages covering the basics for all V35 & V50 models

Much of the information in this manual is also relevant to V65, V75 and 750 small twins. Use this manual in combination with the relevant supplement if your small twin isn't a V35 / V50 mark 1 or 2.
This manual includes common torque settings for small twins.

 23920181 GU23920181 23 92 01 81
 2392 0181 2392.0181 23.92.01.81

Dimensions:
A4 - 134 pages black & white

Wheel bearing

1 required for rear wheel, 2 for front wheel except on Nuovo Falcone where two are used in rear wheel. Check parts book or call for exact applications

 92204217 GU92204217 92 20 42 17
 9220 4217 9220.4217 92.20.42.17

Also fits Royal Enfield Himalayan (Rear)

Dimensions:
40mm OD

Needle roller bearing used in lower suspension linkage for rear shock absorber. 7 bearings required per bike

See SUA81068 for bearing oil seal

AP8110066

Sealed bearing used as rear wheel bearing on some models

1 only required for rear wheel bearing applications

92204218-z 92204218 GU92204218 92 20 42 18
 9220 4218 9220.4218 92.20.42.18

Dimensions:
47mm OD

JMC MAXX Fork Oil SAE 10W

High-performance fork oil based on synthetic base oils, with excellent low-temperature behavior, superior damping properties and high aging resistance, for on- and off-road use. Application: The JMC MAXX fork oil SAE 10W has been specially developed for use in motorcycle forks and shock absorbers. Its excellent viscosity / temperature behavior ensures safe operation even at high temperatures, as well as sensitive response at very low temperatures.

Advantages: - excellent viscosity / temperature behavior and high shear stability - Sensitive response even at extremely low temperatures - highest resistance to aging and oxidation by synthetic base oils - even at high permanent temperatures and extreme loads, best wear protection properties for reliable operation and longest service life - minimized froth - protects reliably against corrosion, wear, sludge and adhesive - neutral against sealing materials - Mixable and compatible with other branded fork oils of the same quality; however, a full oil change is recommended to take full advantage of the product

Note: JMC MAXX Fork oil SAE 10W must not be mixed with glycol- and silicone-based fluids (eg brake fluids DOT 3/4 / 5.1 or DOT 5).The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

GU30530527

Dimensions:
1 litre

Pair of original style Ariete closed end black handlebar grips - lattice pattern.

14603000-z 14603000 GU14603000 14 60 30 00
 1460 3000 1460.3000 14.60.30.00

Dimensions:
32mm external diameter x 134mm length. RH Grip ID 24mm LH 22mm

Kit of 8 shock absorber bushes i.e. the correct quantity for one bike. These bushes do not use a metal central bush

Fits original fitment Koni and Ikon rear shocks.
Use this part in place of Le Mans 1, 2 and 3 seat hinge bush 10502250 (half of one kit required)

18551650-z 18551650 GU18551650 18 55 16 50
 1855 1650 1855.1650 18.55.16.50

Dimensions:
14mm internal diameter, 27mm external diameter