Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Dimensions:
55.7 x 55 x9mm

Bearing used as UJ carrier bearing on pre 2007 models (see TRA90062 for retaining circlip). Used as outer crownwheel carrier bearing on CARC units

 92204230 GU92204230 92 20 42 30
 9220 4230 9220.4230 92.20.42.30

Dimensions:
62mm OD

"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.

5 pin mini relay

Also known as Guzzi ref. 30732560 Can be used in place of 4 pin mini relay ELA01561. We recommend keeping a spare one in your tool kit

 01731760 GU01731760 01 73 17 60
 0173 1760 0173.1760 01.73.17.60

Dimensions:
24mm x 15mm x 25mm body

Collar nut for rear end of gearbox output shaft

See TOA14400 for tool for this nut

 14219310 GU14219310 14 21 93 10
 1421 9310 1421.9310 14.21.93.10

Dimensions:
27mm across flats

Air filter, flat paper cartridge type for models with single throttle body

See SIA10434 for a reusable performance air filter

AP8104924

Dimensions:
120mm x 80mm x 53mm

Clutch thrust bearing complete, sits in recess in rear gearbox casing.

Not suitable for early 4 speed gearboxes unless modified as per chapter 9 of Guzziology. Also known as Guzzi ref. 2A000376

12087001-z 12087001 GU12087001 12 08 70 01
 1208 7001 1208.7001 12.08.70.01

Dimensions:
22mm OD

Dust cover for fork stanchion, seals against stanchion and protects fork seal

28524560-z 28524560 GU28524560 28 52 45 60
 2852 4560 2852.4560 28.52.45.60

Dimensions:
40mm internal diameter at narrow end, 51mm internal diameter at wide end, 35mm height

Central tank mount rubber, mounts on central frame tube

1 required, this is the only frame rubber used for the tank on small twins

 14107100 GU14107100 14 10 71 00
 1410 7100 1410.7100 14.10.71.00

Dimensions:
60mm x 50mm x 25mm overall. 30mm internal diameter

Heavy duty spring used for centrestand and sidestand applications

12434001-z 12434001 GU12434001 12 43 40 01
 1243 4001 1243.4001 12.43.40.01

Dimensions:
97mm overall length