Inlet manifold rubber. Fits between exhaust manifold on cylinder head and carb

Use clip SSA25950

19114320-z 19114320 GU19114320 19 11 43 20
 1911 4320 1911.4320 19.11.43.20

Dimensions:
33mm ID x 39mm length

Shallow splined Newfren clutch friction plate for big twins with old shallow splined clutch centre

2 plates required per clutch overhaul- thicker side of each plate should face transmission. Also check your intermediate plate 12082300. This has shallower splines than the Spada 3 on plates. These are the best fit if you still have the original shallow spline clutch hub

28084460-z 28084460 GU28084460 28 08 44 60
 2808 4460 2808.4460 28.08.44.60

Chrome finish plastic CEV 18343 type indicator with amber lens and 21W bulb

Indicator mounts available separately, see LIA19751. Also known as Ducati part 079903444.1 079903444.2

18750656-z 18750656 GU18750656 18 75 06 56
 1875 0656 1875.0656 18.75.06.56

Also fits Ducati Pantah, Most Ducati Bevels

Dimensions:
70mm diameter lens, M10 mounting socket

Sebac fork damper, standard damping rate

Also known as Guzzi ref. 18526460. See OIA01001 for ATF (used in place of fork oil)

14526455-z 14526455 GU14526455 14 52 64 55
 1452 6455 1452.6455 14.52.64.55

Also fits Benelli Sei 900

Inlet rubber with HT lead guide. This part will only fit the PHM40 carbs with 43.5mm inlet stubs, we recommend measuring your carbs before ordering

Fits between exhaust manifold on cylinder head and carb. Use clip SSA45970

28114360-z 28114360 GU28114360 28 11 43 60
 2811 4360 2811.4360 28.11.43.60

Dimensions:
43.5mm ID x 38mm length

Shallow splined Newfren clutch friction plate for big twins with old shallow splined clutch centre

2 plates required per clutch overhaul- thicker side of each plate should face transmission. Also check your intermediate plate 12082300. This has shallower splines than the Spada 3 on plates. These are the best fit if you still have the original shallow spline clutch hub

28084460-z 28084460 GU28084460 28 08 44 60
 2808 4460 2808.4460 28.08.44.60

Single 100cm length of neoprene rubber pipe used for oil breather applications depending on model. Can be used as fuel pipe on carb bikes. Also see FUA00011 as alternative for this pipe

Use hose clip FUA00004

Dimensions:
6mm ID

Head Gasket

Also known as Guzzi ref.19022021, 19022022, 19022020, 19022022

27022020-z 27022020 GU27022020 27 02 20 20
 2702 2020 2702.2020 27.02.20.20

Dimensions:
68mm bore

1 Litre of Millers Classic Pistoneeze SAE20W-50 mineral oil. We recommend this classic engine oil for older (pre 1998) 2 valve twins, it is similar to Castrol GTX 20/50 (which is no longer available). Pistoneeze 20w50 is a moderate detergent premium SAE 20w50 multigrade mineral engine oil. The formulation includes high quality solvent refined base oils with the latest technology performance additives and shear stable viscosity index improver.

Features & Benefits:

• Incorporates modern additive technology with period viscometrics to provide the optimum lubrication characteristics
• Suitable for higher mileage applications where oil consumption is a problem
• Meets up-to-date specifications along with meeting period performance requirements
• Specific gravity at 15C: 0.833
• Kinematic viscosity at 100C: 18.5cSt
• Kinematic viscosity at 40C: 156.8cSt
• Viscosity index: 133

  
  Quantities required:

  • 850/1000 ALL Models, Cali 1100, Quotas - engine: 3l
  • V35, V50, V65, V75 - engine: 2l
  
  
  See ENA41653 for a oil drain kit for your oil change
  
  Please note this oil CANNOT be posted outside of the UK mainland area.
  
   More than 5 in stock

  Also fits Triumph Bonneville T100

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Complete black tail light unit with number plate light and reflector made by SIM, suitable for pre 1979 models

Back plate for tail lamp is black plastic, not chrome as on the discontinued original. NB does not include leads or bulbs (requires 1 x LIA11200 and 1 x LIA12010 ).

 17740900 GU17740900 17 74 09 00
 1774 0900 1774.0900 17.74.09.00

Also fits Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 900 Darmah, Ducati 900 MHR-I, Laverda Jota (Series 2) Morini 350 Sport, Morini 350 Strada, Morini 500

Dimensions:
approx 112mm wide, 52mm centres on M6 mounting studs