5 pin mini relay

Also known as Guzzi ref. 30732560 Can be used in place of 4 pin mini relay ELA01561. We recommend keeping a spare one in your tool kit

 01731760 GU01731760 01 73 17 60
 0173 1760 0173.1760 01.73.17.60

Dimensions:
24mm x 15mm x 25mm body

1 litre of Millers 80w-90 mineral based transmission oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals

An extreme pressure differential oil SAE 80w90 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.

Provides performance level specified by manufacturers for gearboxes and final drives.
Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. API GL-5 Quantities required:

• V11 Sport - gearbox: 0.85l, bevel box: 0.37l
• Daytona RS, 1100 Sport IE and Centauro - gearbox: 0.75l, bevel box: 0.25l
• Bellagio, 1200 Sport, Breva 850, 1100, Breva 1200, Griso, Norge, Stelvio - bevel box: 0.38l
• Cali 1400 - bevel box: 0.25l
• V35, V50, V65, V75, Nevadas, Breva 750, V7 Classic - gearbox: 0.9l,
• Convert gearbox: 0.60l, bevel box: 0.25l

750S 0.360 ml Bevel box

 More than 5 in stock

Dimensions:
1 litre

[ CLOSE WINDOW ]

[ CLOSE WINDOW ]

Fork Seal

Suitable for WP USD equipped models

01530544-z 01530544 GU01530544 01 53 05 44
 0153 0544 0153.0544 01.53.05.44

Dimensions:
40mm x 50mm x 10.5mm

Clutch cable without starter interlock switch

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 28093010 GU28093010 28 09 30 10
 2809 3010 2809.3010 28.09.30.10

Dimensions:
1321mm outer length, 95mm free length, 9.9mm barrel nipple, 9.9mm barrel nipple

Throttle cable

We advise you to measure your existing cable before ordering in case you have a non standard set up. Two cables required per bike

29117520-z 29117520 GU29117520 29 11 75 20
 2911 7520 2911.7520 29.11.75.20

Dimensions:
1255mm outer length, 122mm free length, 5.7mm barrel nipple, 2.7mm barrel nipple

Clutch cable

We advise you to measure your existing cable before ordering in case you have a non standard set up

2B001202

Dimensions:
Outer 1130 mm free length 105 mm

Clutch cable. also known as Guzzi ref. 2B005132 and 2B002961

We advise you to measure your existing cable before ordering in case you have a non standard set up

2B002961

Dimensions:
outer length 1180 mm, free length 105 mm

Lower choke cable for 1988 on models, fits left and right hand carbs

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 28133578 GU28133578 28 13 35 78
 2813 3578 2813.3578 28.13.35.78

Dimensions:
283mm outer length, 54mm free length, 2.7mm barrel nipple, 2.7mm barrel nipple

Inlet rubber with HT lead guide. This part will only fit the PHM40 carbs with 43.5mm inlet stubs, we recommend measuring your carbs before ordering

Fits between exhaust manifold on cylinder head and carb. Use clip SSA45970

28114360-z 28114360 GU28114360 28 11 43 60
 2811 4360 2811.4360 28.11.43.60

Dimensions:
43.5mm ID x 38mm length

PS 15 rear master cylinder with plastic reservoir

Brembo no. 10.2426.00. Replaces original part with cast reservoir which is no longer available. Also replaces guzzi ref. 29667000. Please note that reservoir is slightly taller than the original, and you may need swap the operating arm from your old master cylinder if this is a different type. This part can be used instead BRC19001 but you will also need to fit a brake reservoir

 10438802 GU10438802 10 43 88 02
 1043 8802 1043.8802 10.43.88.02