One metre of copper core HT lead, this is superior to the more commonly available carbon core lead

Sold by the metre, one metre is enough for two leads on most models with coils under the fuel tank. For models with coils under the side panel you will need two metres. See ELA14715 and ELA14714 for plug caps and ELA20001 for coil screw cap. See ELA00001 for crimp on HT lead connector

Dimensions:
100cm

1 Litre of Millers Classic Pistoneeze SAE20W-50 mineral oil. We recommend this classic engine oil for older (pre 1998) 2 valve twins, it is similar to Castrol GTX 20/50 (which is no longer available). Pistoneeze 20w50 is a moderate detergent premium SAE 20w50 multigrade mineral engine oil. The formulation includes high quality solvent refined base oils with the latest technology performance additives and shear stable viscosity index improver.

Features & Benefits:

• Incorporates modern additive technology with period viscometrics to provide the optimum lubrication characteristics
• Suitable for higher mileage applications where oil consumption is a problem
• Meets up-to-date specifications along with meeting period performance requirements
• Specific gravity at 15C: 0.833
• Kinematic viscosity at 100C: 18.5cSt
• Kinematic viscosity at 40C: 156.8cSt
• Viscosity index: 133

  
  Quantities required:

  • 850/1000 ALL Models, Cali 1100, Quotas - engine: 3l
  • V35, V50, V65, V75 - engine: 2l
  
  
  See ENA41653 for a oil drain kit for your oil change
  
  Please note this oil CANNOT be posted outside of the UK mainland area.
  
   More than 5 in stock

  Also fits Triumph Bonneville T100

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Carb gasket kit / rebuild kit for Dellorto PHBH carbs

Carb overhaul kit, float bowl seal FUA90001, fuel filter FUA60888 and float bowl washer FUA27720 available separately to this carb seal kit

 19939980 GU19939980 19 93 99 80
 1993 9980 1993.9980 19.93.99.80

1 litre of EP75/90 synthetic gear oil for modern gearboxes

A premium OEM gear oil formulated using the latest technology for gearbox applications requiring a 75w90 viscosity. XF Premium gear oil provides enhanced low temperature flow when cold starting, instantly protecting the vital components of the gearbox from the very start of every journey.

XF Premium gearbox oil maximises viscosity stability at high temperatures. This reduces gearbox wear giving superior component protection including gear teeth, shafts and bearings.

Delivers outstanding lubrication and instant protection under hot and cold temperatures. This is an oil specially formulated for and approved by Moto Guzzi. It protects and lubricates over a wide temperature range and under extreme conditions. Also approved by Piaggio, Aprilia, Derbi, Gilera and Vespa. Exceeds API GL-5. Used as gearbox oil in 6 speed V7 and V9 models
Quantities required:

• V9, V7 II and V7 III 6 speed gearbox 0.5l

Dimensions:
1 litre

Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

See BRA10310 for less expensive replica kit

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease

This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).

Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.

 39659000 GU39659000 39 65 90 00
 3965 9000 3965.9000 39.65.90.00

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4

Oil pressure sender, M12 thread, male bullet connector

This oil pressure sensor supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.

See ENA12640 for replacement crush washer if required

 17768750 GU17768750 17 76 87 50
 1776 8750 1776.8750 17.76.87.50

Dimensions:
M12 thread, 46mm x 21mm bolt flats

Black rubber UJ gaiter / boot, clips available separately - see SSA64990 and TRA12544

 18548000 GU18548000 18 54 80 00
 1854 8000 1854.8000 18.54.80.00

Dimensions:
54mm internal diameter (small end), 70mm diameter (big end) x 40mm

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease. We do also sell complete remote PS15 Master cylinders BRC19001

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need kit BRA37232

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Dimensions:
Solid piston 15.84mm OD x 65mm

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease. We do also sell complete remote PS15 Master cylinders BRC19001

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need kit BRA37232

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Dimensions:
Solid piston 15.84mm OD x 65mm