Standard clutch cable without adjuster
Well worth carrying as a spare for when your current cable fails
1 in stock
2B005851
£38.00
INC VAT
£31.67 EX VAT
Reusable oil filter, replaces original plastic filter with this sturdy metal filter and gauze
1 in stock
£32.00
INC VAT
£26.67 EX VAT
Dellorto V5 slide needle for VHB 30 carbs. The original V9 needle has limited availability and this is the closest alternative. Drop the V5 needle by one groove to simulate the V9 needle
The V5 needle has also been discontinued so stocks are limited. Standard needle clip position is 2nd groove from top
2 in stock
13937700 GU13937700 13 93 77 00
1393 7700 1393.7700 13.93.77.00
£18.00
INC VAT
£15.00 EX VAT
Lock nut used as drive box pinion collar nut and clutch lock nut
1 in stock
19356700 GU19356700 19 35 67 00
1935 6700 1935.6700 19.35.67.00
£17.00
INC VAT
£14.17 EX VAT
Left hand heavy duty chrome OE spec mirror, especially suited to Cali models
M10 bolt thread. Originally fitted to Cali Special and Nevada 750 models
1 in stock
03769830 GU03769830 03 76 98 30
0376 9830 0376.9830 03.76.98.30
£43.60
INC VAT
£36.33 EX VAT
Clutch cable
for models with Domino switchgear. We advise you to measure your existing cable before ordering in case you have a non standard set up.
2 in stock
29093070 GU29093070 29 09 30 70
2909 3070 2909.3070 29.09.30.70
£17.10
INC VAT
£14.25 EX VAT
Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers
Supplied with 4 crush washers. Also known as Guzzi ref. 95990033
More than 5 in stock
95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28
Also fits Laverda Jota
£8.40
INC VAT
£7.00 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
More than 5 in stock
£8.20
INC VAT
£6.83 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT
Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.
1 in stock
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£125.00
INC VAT
£104.17 EX VAT