Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Dimensions:
55.7 x 55 x9mm

Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes

Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549

 90403548 GU90403548 90 40 35 48
 9040 3548 9040.3548 90.40.35.48

Dimensions:
47mm OD

Pair of organic EBC FA778 rear brake pads. Twin pin fitting.

Carb gasket kit / rebuild kit for Dellorto VHB29, VHB30, VHB24 and VHB26 carbs

Carb overhaul kit, fuel filter FUA60888 and float bowl seal FUA90001 available separately to this seal kit. As this kit is intended for several different carbs you may have gaskets or O rings remaining after rebuilding. More information on rebuilding your VHB carb can be found here.

 17939950 GU17939950 17 93 99 50
 1793 9950 1793.9950 17.93.99.50

Clutch cable with adjuster for gearbox end

Suitable for all T3 and T4 models fitted with high bars

29093000-z 29093000 GU29093000 29 09 30 00
 2909 3000 2909.3000 29.09.30.00

Dimensions:
1444mm outer length, 80mm free length, 9.9mm barrel nipple, 9.9mm barrel nipple

Black rubber UJ gaiter / boot, clips available separately - see SSA64990 and TRA12544

 18548000 GU18548000 18 54 80 00
 1854 8000 1854.8000 18.54.80.00

Dimensions:
54mm internal diameter (small end), 70mm diameter (big end) x 40mm

Complete Speedo (odometer) cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

19760400-z 19760400 GU19760400 19 76 04 00
 1976 0400 1976.0400 19.76.04.00

Dimensions:
805mm inner length

Carb gasket kit / rebuild kit for 1 Dellorto PHF carb. Suitable for all PHF carbs with accelerator pumps including PHF36. Dellorto ref. 52514-77

Carb overhaul kit, float bowl seal FUA90001 and fuel filter FUA60888 also available separately to this carb seal kit

 14939950 GU14939950 14 93 99 50
 1493 9950 1493.9950 14.93.99.50

Also fits Hesketh, Laverda

Small front battery strap

14704800-z 14704800 GU14704800 14 70 48 00
 1470 4800 1470.4800 14.70.48.00

Dimensions:
240mm x 43mm x 8mm overall

Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders

Also known as Brembo ref. 110312720

 19659500 GU19659500 19 65 95 00
 1965 9500 1965.9500 19.65.95.00