Black plastic front mudguard extension or Fenda Extenda. This will protect the exhaust pipes and front engine cover on your Guzzi from road debris, salt, water and traffic grime thrown up by your front wheel

Specifically designed to follow the contour of your bike's front guard, our Extenda Fenda is supplied with both plastic rivets for mechanical fitment and a sheet of our specially sourced 'Stick Fit Pads' for those customers who would prefer not to drill their front mudguard. Our Extenda Fenda is simple to install and will arrive safely packaged, together with comprehensive fitting instructions and all necessary fittings as detailed above. See this video for help fitting yours

 1 in stock

Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

See BRA10310 for less expensive replica kit

 More than 5 in stock

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Oil pressure switch. May be supplied with a vertical spade connector, this supercedes the original Guzzi part which is no longer available. This version will fit without removal of the alternator

See ENA12640 for replacement crush washer and ELA10005 for female spade connector

 3 in stock

 31768780 GU31768780 31 76 87 80
 3176 8780 3176.8780 31.76.87.80

Oil pressure switch. May be supplied with a vertical spade connector, this supercedes the original Guzzi part which is no longer available. This version will fit without removal of the alternator

See ENA12640 for replacement crush washer and ELA10005 for female spade connector

 3 in stock

 31768780 GU31768780 31 76 87 80
 3176 8780 3176.8780 31.76.87.80

Pair of original style Ariete closed end black handlebar grips - lattice pattern.

 More than 5 in stock

14603000-z 14603000 GU14603000 14 60 30 00
 1460 3000 1460.3000 14.60.30.00

M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer

NB this is a half nut. Can also be used as alternator retaining nut 92603516

 More than 5 in stock

92602516-z 92602516 GU92602516 92 60 25 16
 9260 2516 9260.2516 92.60.25.16

M16 stainless steel full nut and thick washer for rear wheel spindle

Also referred to as Guzzi ref. 14634400 and 92602316

 More than 5 in stock

92602316-z 92602316 GU92602316 92 60 23 16
 9260 2316 9260.2316 92.60.23.16

Output oil seal for drive box

This oil seal fits output side of bevel box

 More than 5 in stock

90407085-z 90407085 GU90407085 90 40 70 85
 9040 7085 9040.7085 90.40.70.85

Dust cover for fork leg, seals against stanchion to protect fork seal

 More than 5 in stock

14524500-z 14524500 GU14524500 14 52 45 00
 1452 4500 1452.4500 14.52.45.00

Rubber intake sleeve for airbox

 1 in stock

 12114301 GU12114301 12 11 43 01
 1211 4301 1211.4301 12.11.43.01