The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop

New Spares Recently Back In Stock

Sort by Title

Sort by Price

Page 22 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28

Clutch Lever

CLA02390 Fits V9 ALL, V7 III ALL, V7 850 ALL

Polished aluminium clutch lever

Also known as Guzzi ref. 2B001300

part in stock 1 in stock

2B002390

£38.00

INC VAT

£31.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Fuel Pipe

FUA00011 Fits 1100 Sport Carb, Cali 3 Carb, Cali 1100 Carb, 850/1000 ALL Models, Nevada 350, Nevada (1991-2003), V35 ALL, V50 ALL, V65 ALL, V7 Sport, 750S, S3

Dimensions:
6mm ID x 9mm OD x 1 metre length

1 metre of Ariete fuel pipe suitable for fuel and breather pipe applications on gravity fed non injection models, cut your fuel lines to your own spec

Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004

part in stock More than 5 in stock

£8.50

INC VAT

£7.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Bearing

TRA92230 Fits 750S, V7 Sport, S3, 850/1000 ALL Models, Quota 1100, Cali 1100 (1994-1997), Cali EV, Griso ALL, Bellagio, Breva 850, Breva 1100, Breva 1200, 1200 Sport, Norge ALL, Stelvio

Dimensions:
62mm OD

Bearing used as UJ carrier bearing on pre 2007 models (see TRA90062 for retaining circlip). Used as outer crownwheel carrier bearing on CARC units

part in stock 3 in stock

92204230 GU92204230 92 20 42 30
9220 4230 9220.4230 92.20.42.30

£14.40

INC VAT

£12.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Seal

GEA90435 Fits V7 700, V7 Special, 850 GT, V7 Sport, 750S, S3, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, 1100 Sport ALL, Centauro, Quota 1100, V35 ALL, V50 ALL, V65 ALL, Nevada 750 (1991-1997), 750 SP, Strada 750, 750T, 750 Targa, Nuovo Falcone, V7 700, V7 Special (1969-1971), Nuovo Falcone, Bellagio, Daytona, Centauro, Griso 850, Griso 1100, Norge (2v/cyl), 1200 Sport (2v/cyl), Breva ALL, V7 Cafe, V7 Racer, V7 Special, V7 Stone, V7 Classic, V7 II, V7 III ALL

Dimensions:
47mm OD

Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes

Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549

part in stock More than 5 in stock

90403548 GU90403548 90 40 35 48
9040 3548 9040.3548 90.40.35.48

£18.50

INC VAT

£15.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Crank Oil Seal Rear

ENA90367 Fits V7 Sport, 750 S3, 750S, V7 700, V7 Special (1969-1971), 850 GT, 850/1000 All Models, 1100 Sport ALL, 1200 Sport, Centauro, Daytona, Quota ALL, Cali 1100 (1994-1997), Cali EV, V35 ALL, V50 ALL, V65 ALL, V75 ALL, Strada 750, 750 Targa, 750 SP, Nevada 350 (1991-1998), Nevada 750 (1991-1998), V11 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Stelvio, Norge, Griso, Cali 1400 ALL

Dimensions:
68mm OD

Rear crankcase oil seal or rear main oil seal.

Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch

part in stock More than 5 in stock

90405367-z 90405367 GU90405367 90 40 53 67
9040 5367 9040.5367 90.40.53.67

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

ENI Brake Fluid 1L DOT 4

BRA99003 Universal Part

Dimensions:
1 litre

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

part in stock More than 5 in stock

£13.75

INC VAT

£11.46 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 6mm Stainless Steel

SSA00470 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT, Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
10mm threaded shank, 8mm across flats

A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787

See BRA36794 for rubber cap

part in stock More than 5 in stock

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Ignition Switch

ELA17735 Fits Le Mans 1000, Le Mans 1, Le Mans 2, G5, Convert, Le Mans 3, S3, T3, T4, 1000S, Mille GT, Strada 1000, Spada ALL, Cali 2, Cali 1100 (1994-1997), V35 ALL, V50 ALL, V65 ALL, V75, 750 Targa, Strada 750, 750T, 750 SP

Dimensions:
54mm long overall (including pins) x 29mm

Zadi ignition switch with 2 keys

4 male spade type connectors on underside, replaces original switch with bullet connectors. See ELA10005 for female spade connectors and FRA19741 for rubber wiring boot

part in stock More than 5 in stock

31735360 GU31735360 31 73 53 60
3173 5360 3173.5360 31.73.53.60

Also fits Benelli 750 Sei (series 2) - fits with minor modification

£31.00

INC VAT

£25.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Rear Suspension Bearing

SUA81066 Fits Bellagio, Breva 850, Breva 1100, Breva 1200, Griso 1100, Griso 1200, MGS-01, Norge ALL, 1200 Sport, Stelvio

Needle roller bearing used in lower suspension linkage for rear shock absorber. 7 bearings required per bike

See SUA81068 for bearing oil seal

part in stock More than 5 in stock

AP8110066

£6.60

INC VAT

£5.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Short Stainless Steel

SSA36794 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

part in stock More than 5 in stock

£8.20

INC VAT

£6.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 22 of 28

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28