Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.

See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.

 More than 5 in stock

Sump bolt kit containing all replacement stainless steel socket cap bolts for models with a sump extension fitted. Some models e.g. Cali 1100 and series 1 Cali EV models have a sump extension fitted as standard

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). For Cali EV models check whether you have a sump extension fitted, the later one piece deep sump uses SSA80008

 More than 5 in stock

Full drive box seal kit and gasket set for overhauling the rear drive box

For Breva 750 from frame no. LL111908.

Bearings available separately

 More than 5 in stock

Full drive box seal kit and gasket set for overhauling the rear drive box

Bearings available separately

 More than 5 in stock

Top end gasket and seal set containing rocker cover, base, head and exhaust gaskets plus cylinder base O ring

Top end gasket set for one cylinder. Inlet manifold gaskets available separately

 3 in stock

Full service kit containing 1 x UFI oil filter, 1 x UFI air filter, 2 x NGK CPR8EB-9 spark plugs, crush washers and filter cover O ring to complete a service on your bike

Save £'s by buying everything in a service kit

Oils and lubricants available separately. The oils you need are 2 x OIA01051 + 1 x OIA08196 + 1 x OIA08193. See FUA01090 for fuel filter

 2 in stock

Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers

The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come

 More than 5 in stock

1A003632R

Kit containing 2 Litres of ENI i-Ride Racing SAE10W-60 synthetic engine oil and 1 litre of 75W-140 gearbox and final drive oil. This kit contains all the oil you will need to change your engine, gearbox and drive box oil.

Please note this kit CANNOT be posted outside of the UK mainland area

 More than 5 in stock

Kit containing 2 Litres of ENI i-Ride Racing SAE10W-60 synthetic engine oil and 1 litre of 85W-140 final drive oil. This kit contains all the oil you will need to change your engine and drive box oil. Note that the gearbox oil does not need changing during a standard service.

Please note this kit CANNOT be posted outside of the UK mainland area

 More than 5 in stock

Full service kit containing 1 x UFI oil filter, 1 x UFI air filter, crush washer and filter cover O ring, drain and level plug seals to complete a service on your bike

Save £'s by buying everything in a service kit

Guzzi approved ENI oils and lubricants available separately. The oils you need are 2 x OIA01051 or 2 x OIA01151 for the engine or save time and money by ordering our service oil kit OIA85001. See SIA85888 for the long life spark plugs

 2 in stock