Page 3 of 17
Tarozzi Folding Rubber Sleeved Footpeg Riders ACA30115 Fits 850/1000 ALL Models, Cali 1100 (1994-1997) ![useful Moto Guzzi model information](../img/HelpIcon.gif) ![click to view full size](../../prod_img/sml/IMG_3198.jpg) Dimensions: 103mm wide footpeg, M10 thread, 16mm OD thicker section Rubber sleeved folding riders footpeg, suitable for Tarozzi rearsets and as an upgrade for standard footrests Folding footrest 2 in stock
£46.00 INC VAT £38.33 EX VAT ![this is the price you will pay if you are ordering from outside the UK](../img/HelpIcon.gif)
Clutch Centre Nut Tool TOA14651 Fits V7 Sport, 850 GT, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone, Centauro, Daytona, 1100 Sport, Quota 1100, Breva 1100, Breva 1200, Griso 850, Griso 1100, 1200 Sport (2006-2007), Norge ALL ![useful Moto Guzzi model information](../img/HelpIcon.gif) Tool for clutch centre gear nut Half inch socket drive. This is a cheaper aftermarket tool- see TOA14903 for original factory item 1 in stock
14912603 GU14912603 14 91 26 03 1491 2603 1491.2603 14.91.26.03 £39.00 INC VAT £32.50 EX VAT ![this is the price you will pay if you are ordering from outside the UK](../img/HelpIcon.gif)
Nut Crankshaft Timing Sprocket ENA93026 Fits 850/1000 ALL Models, V11 Sport, MGS-01, Cali 1100 (series 1), Quota 1100, V7 Sport, 850 GT ![useful Moto Guzzi model information](../img/HelpIcon.gif) ![click to view full size](../../prod_img/sml/IMG_1896.jpg) Dimensions: 23.5mm ID Special nut for retaining crankshaft timing sprocket. Also used as clutch centre nut on V11 Sport See TOA18651 for special tool to remove and tighten this nut. Nut also known as Guzzi ref. 93601025. See ENA92525 for correct part for series 2 Cali 1100s 4 in stock
93601026 GU93601026 93 60 10 26 9360 1026 9360.1026 93.60.10.26 £8.00 INC VAT £6.67 EX VAT ![this is the price you will pay if you are ordering from outside the UK](../img/HelpIcon.gif)
Automatic Bleed Valve M10 Bleed Nipple BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL ![useful Moto Guzzi model information](../img/HelpIcon.gif) ![click to view full size](../../prod_img/sml/BRA41650.jpg) Dimensions: M10 x 1 The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function on this auto bleed valve, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover 5 in stock
£26.50 INC VAT £22.08 EX VAT ![this is the price you will pay if you are ordering from outside the UK](../img/HelpIcon.gif)
Automatic Bleed Valve M10 Single Banjo Bolt BRA41653 Universal Part ![click to view full size](../../prod_img/sml/IMG_6852.jpg) Dimensions: M10 bolt with M6 bleed nipple The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:
- Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover 3 in stock
£33.00 INC VAT £27.50 EX VAT ![this is the price you will pay if you are ordering from outside the UK](../img/HelpIcon.gif)
Automatic Bleed Valve M6 Bleed Nipple BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL ![useful Moto Guzzi model information](../img/HelpIcon.gif) ![click to view full size](../../prod_img/sml/IMG_6858.jpg) Dimensions: M6 x 16mm The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed. - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover More than 5 in stock
£26.50 INC VAT £22.08 EX VAT ![this is the price you will pay if you are ordering from outside the UK](../img/HelpIcon.gif)
Automatic Bleed Valve M10 Bleed Nipple BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL ![useful Moto Guzzi model information](../img/HelpIcon.gif) ![click to view full size](../../prod_img/sml/BRA41650.jpg) Dimensions: M10 x 1 The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function on this auto bleed valve, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover 5 in stock
£26.50 INC VAT £22.08 EX VAT ![this is the price you will pay if you are ordering from outside the UK](../img/HelpIcon.gif)
Mini Relay 5 Pin ELA01560 Fits Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, 1100 Sport ALL, Centauro, Daytona, Nevada 750 (1998-2003), Nevada 350, Quota 1100, V11 Sport, Cali 3, Strada 1000, 1200 Sport, Breva 850, Breva 1100, Breva 1200, Griso ALL, Norge ALL, Stelvio ![useful Moto Guzzi model information](../img/HelpIcon.gif) ![click to view full size](../../prod_img/sml/IMG_1517.jpg) Dimensions: 24mm x 15mm x 25mm body 5 pin mini relay Also known as Guzzi ref. 30732560 Can be used in place of 4 pin mini relay ELA01561. We recommend keeping a spare one in your tool kit More than 5 in stock
01731760 GU01731760 01 73 17 60 0173 1760 0173.1760 01.73.17.60 £14.00 INC VAT £11.67 EX VAT ![this is the price you will pay if you are ordering from outside the UK](../img/HelpIcon.gif)
Starter Motor ELA05731 Fits 1200 Sport, Bellagio, Cali 1400 ALL, Griso ALL, Breva 850, Breva 1100, Breva 1200, Norge ALL, Stelvio, V7 Classic, V7 Cafe, V7 Special, V7 Racer, Nevada 750 (2009-2016), V7 II ALL, V7 III ALL, V9 ALL, V85TT ![useful Moto Guzzi model information](../img/HelpIcon.gif) Replacement starter motor for 2006 on models. Also known as 97729R This is a less expensive aftermarket replacement for the OE starter.
Not interchangeable with Valeo and Bosch starters from earlier models. Get a £20 discount on this part if you send us your faulty but reconditionable starter motor 1 in stock
05730730 GU05730730 05 73 07 30 0573 0730 0573.0730 05.73.07.30 £150.00 INC VAT £125.00 EX VAT ![this is the price you will pay if you are ordering from outside the UK](../img/HelpIcon.gif)
Mistral Frame Plug Kit ACA39100 Fits V7 ALL, V7 II ALL, V7 III ALL, V7 850 ALL, V9 ALL ![useful Moto Guzzi model information](../img/HelpIcon.gif) Kit of 4 black frame caps to tidy up the bolt heads for the pillion and exhaust footpeg hanger Simple installation, lasting looks 1 in stock
£15.00 INC VAT £12.50 EX VAT ![this is the price you will pay if you are ordering from outside the UK](../img/HelpIcon.gif)
Page 3 of 17
|