Black rubber grommet with various applications including screen mounting and master cylinder mount

 4 in stock

 91551167 GU91551167 91 55 11 67
 9155 1167 9155.1167 91.55.11.67

Black cover or cap for Stahlbus M6 bleed valve. Prevents contamination of the valve and smartens up your brake caliper

 4 in stock

Hex head brake disc bolt, mainly used for rear brake disc but also used for frame applications

Also known as Guzzi ref. 597150, 6 bolts required per disc

 4 in stock

 98682425 GU98682425 98 68 24 25
 9868 2425 9868.2425 98.68.24.25

Pair of EBC FA266 rear brake pads for late type Brembo caliper

Single pin fitting. 2013 onwards V7 models have different two pin pads.

 3 in stock

31654681-z 31654681 GU31654681 31 65 46 81
 3165 4681 3165.4681 31.65.46.81

Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders

Also known as Brembo ref. 110312720

 3 in stock

 19659500 GU19659500 19 65 95 00
 1965 9500 1965.9500 19.65.95.00

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 3 in stock

Also fits Cagiva Elefant E750, Ducati 748

Brembo caliper cover for models with P2 F08 (P8) single bleed nipple calipers

You may need to immerse the cover in warm water before fitting

 3 in stock

 17654760 GU17654760 17 65 47 60
 1765 4760 1765.4760 17.65.47.60

Brakelight switch

Stop light switch also known as Guzzi ref. AP8224192
See FRA98412 for mounting screw

 3 in stock

03749845-z 03749845 GU03749845 03 74 98 45
 0374 9845 0374.9845 03.74.98.45

Steel front left brake pipe with threaded connectors at each end

Rigid brake line

 3 in stock

 17658950 GU17658950 17 65 89 50
 1765 8950 1765.8950 17.65.89.50

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   3 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]