The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

Sort by Title

Sort by Price

Page 5 of 27

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27

Brake Pads EBC FA018

BRA54724 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Dimensions:
55.7 x 55 x9mm

Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

part in stock 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£19.30

INC VAT

£16.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Fine Thread

ELA07116 Fits Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, T5, 1000S, 1000 SP, SP II, Spada 3, G5, Convert, Cali 3, Cali 1100 (1994-1997), Cali EV, Spada ALL, Mille GT, Nevada 350, Nevada 750 (1991-2003), V65 Florida, 750SP, Strada 750, 750T, 750 Targa

Dimensions:
M10 fine thread

Fine thread screw in brakelight switch for linked system proportioning valve or splitter. See ELA12735 for rubber cap

Stop light switch also known as Guzzi ref. 63657000

part in stock 5 in stock

79654116 GU79654116 79 65 41 16
7965 4116 7965.4116 79.65.41.16

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 GT/Sport Köwe, Ducati 750 Paso (1984-1992), Ducati 750 Sport, Ducati 750/900 SS Köwe, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR-I, Ducati 900 SS (1990), Ducati 906 Paso (1988), Ducati 1000 MHR-2/S2

£21.40

INC VAT

£17.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Ball Bearing

ELA92708 Fits Daytona RS, Daytona Racing, 1100 Sport IE, Le Mans 1000, 1000S, Cali 3, Cali 1100 (1994-1997), Cali EV, Centauro, Mille GT, Strada 1000, V35 3, V50 PA, NTX 650, V65 Florida, 750 SP, Strada 750, 750 Targa, 750X, Nevada 750 (1991-2003), Quota 1100, Spada 3, V11 Sport

Dimensions:
3.9mm OD

Ball bearing for brakelight switch

part in stock 5 in stock

92295708 GU92295708 92 29 57 08
9229 5708 9229.5708 92.29.57.08

£0.90

INC VAT

£0.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Short Stainless Steel

SSA36794 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

part in stock 5 in stock

£8.20

INC VAT

£6.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Cable Rubber

BRA12300 Fits V7 700, 850 GT, V7 Special (1969-1971)

Dimensions:
135mm x 30mm

Rubber brake cable sleeve for lower end of cable

part in stock 4 in stock

12626300-z 12626300 GU12626300 12 62 63 00
1262 6300 1262.6300 12.62.63.00

£8.30

INC VAT

£6.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Master Cylinder Brembo PS11 & PS12 Cap and Rubber Kit

BRA14700 Fits 750 S3, Convert, G5, Cali 2, Le Mans 1, Le Mans 2, Le Mans 3, T3, T4, V35 II, V50 3, V65 ALL, V75 (4 valves per cylinder), 750 SP, 750 Targa, Strada 750, NTX 350, V35 II, V35 Florida, Cali EV, Cali Jackal, Nevada (1991 - 2003), Cali 1100 (frame nos KC12446 - KD12178), Cali Stone, 1200 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Norge ALL, Quota 1100, Stelvio, Bellagio

Dimensions:
53mm OD cap

Kit consisting of black plastic cap and rubber cap seal for PS 12 round handlebar master cylinders and single horizontal outlet remote reservoirs (e.g. BRG19901 )

Also known as Guzzi ref. 17661052, 10271110. Brembo ref. 110430830. This is the smaller of the two round master cylinder caps used on V35, V50, V65 and 850/1000 models

part in stock 4 in stock

10430830 GU10430830 10 43 08 30
1043 0830 1043.0830 10.43.08.30

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads EBC FA209

BRA45446 Fits Quota 1100, Bellagio, Cali Jackal, Cali Stone, Cali EV (1997-2007), Cali Special, Cali Vintage, Cali Aquila Nera, Cali 1400

Pair of EBC FA209 brake pads, used for front brake pads on Quota and Bellagio, rear brake pads for Cali 1400, Cali EV, Cali Stone, Cali Jackal and Special. All use Brembo PF2.3032 caliper

Also known as Guzzi ref. 30654626, AP8113627

part in stock 4 in stock

03654600-z 03654600 GU03654600 03 65 46 00
0365 4600 0365.4600 03.65.46.00

£18.90

INC VAT

£15.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Front With Screws

ELA30860 Fits Cali 1100, Cali EV (1997-2001), Cali Jackal, Cali 3, V11 Sport, Nevada 750 (1991-2003), Nevada 350, Strada 1000, 750X, T5 Polizia, Daytona ALL, 1100 Sport IE, Le Mans 1000 (1988-1994), 750T

Dimensions:
20mm x 6mm x 9mm excluding spade connectors

Brakelight switch for handlebar mounted master cylinder

Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815. See ELA30861 for less expensive alternative part. Sometimes supplied with three terminals, in this instance disregard middle terminal

part in stock 4 in stock

30749860 GU30749860 30 74 98 60
3074 9860 3074.9860 30.74.98.60

£17.60

INC VAT

£14.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 8mm Stainless Steel

SSA01659 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, V85TT

Dimensions:
M8 x 1.25 standard thread, 10mm threaded shank, 16mm from tip to underside of flats

A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models

Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230

part in stock 4 in stock

01659230 GU01659230 01 65 92 30
0165 9230 0165.9230 01.65.92.30

£6.10

INC VAT

£5.08 EX VAT this is the price you will pay if you are ordering from outside the UK

M8 Bolt Hex Head 75mm Stainless Steel

SSA08075 Fits V35 II, V35 3, V35C, V50C, V50 3, Monza, Le Mans 2, Le Mans 3, Cali 3, 1000S, Le Mans 1000, 1100 Sport, V11 Sport, Daytona, Centauro, Cali 1100 (1994-1997), Cali EV, Quota 1100

Dimensions:
M8 x 75mm

M8 x 75mm A2 stainless steel hex head bolt used as front disc bolt on some small twins and Le Mans 2 and 3. Two of these bolts used as starter motor mounting bolt on big twins fitted with Valeo starter motor

part in stock 4 in stock

98052475 GU98052475 98 05 24 75
9805 2475 9805.2475 98.05.24.75

£1.40

INC VAT

£1.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 5 of 27

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27