Shop headings: New Spares | Used Spares | Accessories | Brands
Black stainless steel exhaust cover for the exhaust link pipe and CAT. Fits easily to the standard exhaust system to improve the styling of the V100. This brushed stainless finish cover also helps shield your feet from the heat of the CAT. This shorter cover is compatible with a centre stand.
A quality accessory hand made in Italy for your V100
1 in stock
£60.00
INC VAT
£50.00 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
1 in stock
£160.00
INC VAT
£133.33 EX VAT
The Mistral footrest kit offers a much improved foot position for the pillion by lowering the footrest to immediately above the silencer. By extending the leg position, pillion passengers feel more secure and touring comfort is much improved. This reasonably priced Mistral footrest kit is made close to the Guzzi factory in Mandello and looks as good as any stock part. Fitting is simple using the original attachments (springs, bolts, etc.).
Silver painted finish. Compatible with both Mistral and stock silencers. Kit contains components to lower both pillion footrests and includes shims to remove excess movement. See this video for installation instructions.
1 in stock
£80.00
INC VAT
£66.67 EX VAT
Matte black finish front engine guard to protect the front cover of your V100 from stone cips and corrosive road grime. Fit now before damage occurs
This engine cover is manufactured from AW5083 aluminium for toughness. Fit in conjunction with a EXTRA Fenda Extenda ACA58780 for maximum protection.
1 in stock
£50.00
INC VAT
£41.67 EX VAT
Black plastic front mudguard extension or Fenda Extenda. This will protect the exhaust pipes and front engine cover on your Guzzi from road debris, salt, water and traffic grime thrown up by your front wheel
Specifically designed to follow the contour of your bike's front guard, our Extenda Fenda is supplied with both plastic rivets for mechanical fitment and a sheet of our specially sourced 'Stick Fit Pads' for those customers who would prefer not to drill their front mudguard. Our Extenda Fenda is simple to install and will arrive safely packaged, together with comprehensive fitting instructions and all necessary fittings as detailed above. See this video for help fitting yours
1 in stock
£22.50
INC VAT
£18.75 EX VAT
Engine guard kit developed to protect both header pipes and cylinder head. A pair of lightweight ice grey finish aluminium head guards. These include a shock-absorbing pad to protect the head, rocker covers and exhaust headers from low speed impacts.
Lower profile than a conventional crashbar these are an essential piece of kit for your V100 which will help protect expensive engine and exhaust components in the unfortunate event of a low speed spill. Tested by Mistral.
Fit yours before you need them!
See this video for installation instructions. Note that black protectors are shown in second photo.
1 in stock
£215.00
INC VAT
£179.17 EX VAT
Matte black finish Avion performance silencer. GT silencer is compatible with factory panniers. Full deep sound enhances the V-twin engine note and you'll appreciate the extra 2hp that is released. It's also a full kilo lighter than the stock part. Distinctive Avion styling and shorter length compliments the V100 Mandello. Includes carbon fibre heat shield.
Mistral focused the development on the technical details that characterize this exhaust, performing something of unique. Thanks to a different internal construction Mistral saved about 1 kilogram compared to the stock silencer and improved performance, not that the bike was lacking but more fluidity and torque is always a good thing to have. The final endcap, totally milled from a block of aluminum, ensure an unique and valuable look that combined with the carbon fibre heat shield match perfectly the sportly character of the bike.
1 in stock
£435.00
INC VAT
£362.50 EX VAT
This adjustable fuelling modifier uses the lambda sensor signal to the ECU. By modifying that signal it achieves an improvement in low and midrange throttle response. Comes with wiring harness and instruction manual, installation is simple and does not require any specialist tools. Suitable for all single throttle body V7, V9 and V85 TT models.
Rapid Bike EASY: A base level simple plug and play modulator equipped with a microprocessor managing the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate power gaps typical of the low and medium rpm range.
See installation instructions here.
1 in stock
£149.00
INC VAT
£124.17 EX VAT
K&N high performance air filter, flat paper cartridge type
1 in stock
AP8104329
Sorry this item is out of production
Replacement brake or gear lever for bikes fitted with Tarozzi rearsets
See ACA30060 for rearset kits
Availability varies on this part, check availability
£32.40
INC VAT
£27.00 EX VAT