Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes
Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549
More than 5 in stock
90403548 GU90403548 90 40 35 48
9040 3548 9040.3548 90.40.35.48
£18.50
INC VAT
£15.42 EX VAT
Rear crankcase oil seal or rear main oil seal.
Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch
More than 5 in stock
90405367-z 90405367 GU90405367 90 40 53 67
9040 5367 9040.5367 90.40.53.67
£14.00
INC VAT
£11.67 EX VAT
Front crank oil seal for models with Bosch or Ducati charging systems
Also known as Guzz ref. 90402839
More than 5 in stock
90402840-Z
£9.50
INC VAT
£7.92 EX VAT
Push fit fuel filter UFI 31 501 00
See FUA30107 for alternative filter from Mahle. For series 2 Daytona only
3 in stock
30106000 GU30106000 30 10 60 00
3010 6000 3010.6000 30.10.60.00
£19.00
INC VAT
£15.83 EX VAT
Pair of EBC FA095 brake pads for Brembo 5165 single pin four piston calipers
We advise checking your front caliper(s) have one not two pad pins
More than 5 in stock
30654602-z 30654602 GU30654602 30 65 46 02
3065 4602 3065.4602 30.65.46.02
Also fits Magni Sfida
£18.80
INC VAT
£15.67 EX VAT
High pressure black fuel line / fuel line, can be used to replace fuel line on other models with 6mm ID fuel lines
This high pressure fuel hose is rated to 225 PSI. It has been designed for use with Modern Chemically Aggressive Bio-Ethanol Enriched Petrol Formulations (E5 & E10) As per currently served petrol pump petrol. Confirms to SAE J30 R7 and BS AU 108. See FUA00004 for hose clips
4 in stock
AP8144069
£8.80
INC VAT
£7.33 EX VAT
Dellorto needle valve kit comprising of valve and felt washer
200 needle valve for VHB24, VHB26 and PHBH carbs
2 in stock
19934600 GU19934600 19 93 46 00
1993 4600 1993.4600 19.93.46.00
£20.30
INC VAT
£16.92 EX VAT
Dimensions:
M10 conventional thread, approx. 240mm reach to far edge of mirror, mirror 110mm diameter
Black handlebar mounted mirror. Conventional M10 thread, head is threaded for left or right hand fitment.
Supercedes BUMM mirror HAA36021W. See ACA00101 for a black mirror extender kit to extend the reach of this mirror.
4 in stock
£18.00
INC VAT
£15.00 EX VAT
90 degree angle drive box for speedo and tacho cables, screws into rear of clock
Fits all 850/1000 models. Also known as cable gearbox
3 in stock
17768360 GU17768360 17 76 83 60
1776 8360 1776.8360 17.76.83.60
£35.00
INC VAT
£29.17 EX VAT
Quality cruiser screen from Puig for your Guzzi. Made from 3mm High Impact Acrylic and supplied with durable handlebar fittings this screen will help keep the weather off for years to come. Adjustable fittings enable this to be fitted to a range of models.
Suitable for models with 22mm and 28mm diameter handlebars (not those with 'T Bars' like the Cali Aluminium and Bellagio)
1 in stock
£130.00
INC VAT
£108.33 EX VAT