Shop headings: New Spares | Used Spares | Accessories | Brands
This section contains everything brake related from pads to banjo bolts and discs
A set of 6 x titanium hex head brake disc bolts for front discs on all models except V7 III and V7 850 where you will need 2 kits (to cover front and rear) or 3 kits for V85TT and V100 where they are also used front and rear.
Also known as Guzzi ref. 03611445 2B009221 and 2B002416. 1 kit required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing.
Tensile strength of these bolts is 950 - 970Mpa.
Ideal for replacing standard disc bolts which corrode and have soft heads. These Ti bolts will look great for a very long time!
AP8152286
Dimensions:
M8 x 20mm
£23.00
INC VAT
£19.17 EX VAT
One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area.
See BRA99014 for high performance alternative
Dimensions:
1 litre
£13.75
INC VAT
£11.46 EX VAT
Copper crush washer for brakeline connections, fits standard banjo bolt
Two M10 washers required per banjo bolt. Interchangeable with SIA10900
25656100 GU25656100 25 65 61 00
2565 6100 2565.6100 25.65.61.00
£0.70
INC VAT
£0.58 EX VAT
Rubber bleed nipple cap with retaining ring
Suitable only for M6 bleed nipples
Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec
£1.00
INC VAT
£0.83 EX VAT
Titanium hex head brake disc bolt for front discs on all except V7 III, V7 850, V85TT and V100 where it is used front and rear. See SSA81288 for a kit of 6 bolts.
Also known as Guzzi ref. 03611445 2B009221 and 2B002416. 6 bolts required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing.
Tensile strength of these bolts is 950 - 970Mpa.
Ideal for replacing standard disc bolts which corrode and have soft heads. These Ti bolts will look great for a very long time!
AP8152286
Dimensions:
M8 x 20mm
£4.00
INC VAT
£3.33 EX VAT
Hex head brake disc bolt for front discs on all except V7 III, V7 850, V85TT and V100 where it is used front and rear. See SSA81286 for a longer lasting titanium disc bolt
Also known as Guzzi ref. 03611445 2B009221 and 2B002416. 6 bolts required per disc. Some models use shorter FRA81285 which is M8 x 16- checks parts book for exact listing
AP8152286
Dimensions:
M8 x 20mm
£2.40
INC VAT
£2.00 EX VAT
Socket cap brake disc bolt with shoulder for rear brake disc
6 bolts required per disc. Also used as front disc bolt on T5 Polizia (1995-2001) and for EBC discs with 10mm bolt holes
30611460 GU30611460 30 61 14 60
3061 1460 3061.1460 30.61.14.60
Dimensions:
M8 with 10mm OD shoulder
£3.50
INC VAT
£2.92 EX VAT
Split pin for brake pedal pivot
95500227 GU95500227 95 50 02 27
9550 0227 9550.0227 95.50.02.27
Dimensions:
28mm long
£1.00
INC VAT
£0.83 EX VAT
Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers
Supplied with 4 crush washers. Also known as Guzzi ref. 95990033
95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28
Also fits Laverda Jota
Dimensions:
M10 x 1
£8.40
INC VAT
£7.00 EX VAT
Zinc finish brake disc bolt, pre-treated with thread locking compound.
98230825-z 98230825 GU98230825 98 23 08 25
9823 0825 9823.0825 98.23.08.25
£2.76
INC VAT
£2.30 EX VAT