The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Moto Guzzi New Spares T5 SP II Spada 3 Mille GT Strada 100 Tools

Sort by Title

Sort by Price

Page 1 of 2

1 2

Oil Filter Tool 8 Sides

TOA41006 Fits Moto Guzzi 125 2C, 250 TS, S3, 850/1000 ALL Models, Daytona 1000, Cali 1100 (1994-1997), 1100 Sport Carb, Cali EV, Cali Jackal, Cali Stone, Cali Vintage, Quota ALL

8 sided oil filter tool for new UFI filters

This tool is for models where the sump needs to be removed to get to the oil filter. This fits SIA14530 and the later metal finish filter SIA15300 which was updated to 8 sides in late 2018. Not suitable for Mahle oil filters

More than 5 in stock

Dimensions:
81mm OD

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M10 Bleed Nipple

BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function on this auto bleed valve, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover

4 in stock
Dimensions:
M10 x 1
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Spark Plug Spanner

TOA00114 Fits V35 (ALL 2 valve), V50 (ALL 2 valve), V65 (ALL 2 valve), V75 (ALL 2 valve), Strada 750, 750T, 750 Targa, 750 SP, 750X, Nevada ALL, V7 Classic, Breva 750, V7 Racer (2011), V7 Cafe, 850/1000 ALL Models, Cali Stone, Cali Jackal, Breva 1100, Breva 1200 (2 Valves Per Cylinder), Cali 1100 (1994-1997), Cali EV, Norge 1200 (2v/cyl), Griso 1100, 1100 Sport, Quota 1100, V11 Sport, 1200 Sport (2v/cyl), Bellagio

Long reach spark plug spanner for all two valves per cylinder twins. This plug spanner fits the large spark plug on twin plugged models, see TOA05931 for a spanner for the small long life PMR8B spark plug

4 in stock

£9.90

INC VAT

£8.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Autosol Metal Polish 75ml Tube

SIA30003 Universal Part

Brilliant chrome, aluminium and metal polish.

Make your Guzzi gleam.

3 in stock

£6.50

INC VAT

£5.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Stahlbus Oil Drain Valve

ENA41653 Fits V35 I, V35 II, V35C, Imola ALL, V50 ALL, V65, V75, V7 Sport, 750S, S3, 850/1000 ALL Models, Nevada 750, Cali 1100, Cali EV, Cali Stone, Cali Jackal, Breva 750, V7 Cafe, V7 Classic, 750 Targa, Strada 750, 750 SP

As we all know, an oil change on your Guzzi can be a messy business, this valve and pipe kit allows you to direct all the used oil into a container for disposal.
Imagine a tool free oil change!
This system works by using a quick release locking valve which will only allow oil to pass through when the drain pipe valve is attached. A cap covers the valve in normal use. Replaces the existing sump drain plug
Consists of:

Valve body, CNC precision turned part made of high quality steel
Copper crush washer
Hose connector, CNC precision turned part made of high quality steel
High quality hose 40cm long
Protection cover made of aluminum, anodized
Illustrated Manual

One time installation, so it will not wear the weak thread in your sump pan. Not suitable for NTX and TT models fitted with sump bashguards

3 in stock

Dimensions:
M20 x 1.5 sump plug

£32.50

INC VAT

£27.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Alternator Rotor Removal Tool

TOA14008 Fits Cali 2, T3, 750S, S3, 850T, T4, T5 (Series 1), Convert, G5, 1000 SP, SP II, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT (Series 1), V35, V35C, V35 Florida, Imola 2, V35 TT, V50, Monza, V65, V7 Sport

Stainless steel tool for removing Bosch alternator rotor. Will also fit Saprisa.

Simply screw in until the rotor pops off

2 in stock

Also fits Benelli Sei 900 (Series 2)

£6.60

INC VAT

£5.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centre Nut Tool

TOA14651 Fits V7 Sport, 850 GT, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone, Centauro, Daytona, 1100 Sport, Quota 1100, Breva 1100, Breva 1200, Griso 850, Griso 1100, 1200 Sport (2006-2007), Norge ALL

Tool for clutch centre gear nut

Half inch socket drive. This is a cheaper aftermarket tool- see TOA14903 for original factory item

2 in stock

14912603 GU14912603 14 91 26 03
1491 2603 1491.2603 14.91.26.03

£39.00

INC VAT

£32.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centering Tool

TOA30510 Fits 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, Spada 3, V11 Sport ALL, Le Mans 1000 (from engine VV016375), Mille GT (from engine VT024596), Cali 3 (from engine VT032542), Daytona, Centauro, Cali Vintage, Bellagio, Daytona, Centauro, Breva 850, Breva 1100, Griso 850, Griso 1100, Norge (2v/cyl), 1200 Sport (2v/cyl)

Splined tool for aligning clutch plates on reassembly, without this clutch alignment tool you risk damaging the intermediate plate. The tool screws into the back of the crankshaft to compress the clutch springs and align the clutch friction plates

Suitable only for later clutch centre spline type (e.g. clutch plate CLA05430). As used by the Gutsibits spanner monkeys on their bikes

1 in stock

30906510 GU30906510 30 90 65 10
3090 6510 3090.6510 30.90.65.10

£110.00

INC VAT

£91.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Workshop Tank Protector

SIA00001 Universal Part

Thick protective tank cover for your workshop. Ideal for preventing expensive damage to your motorcycle tank when working on your bike (avoid brake fluid spills etc...) and also useful for leaving on your bike when not in use to avoid accidental scratches. Special anti-slip material on underside secures cover to your motorcycle tank when in use. Upper side is nylon for ease of cleaning.

1 in stock

£18.00

INC VAT

£15.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Distributor Tool

TOA14001 Fits T3, T4, T5, Convert, G5, 1000 SP, SP II, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, V7 Sport, 750S, S3, 850T

Special tool for tightening the awkward to reach distributor clamp bolts, avoids scuffed knuckles!

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

14927001 GU14927001 14 92 70 01
1492 7001 1492.7001 14.92.70.01

£27.80

INC VAT

£23.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 1 of 2

1 2