K&N high performance air filter, flat paper cartridge type for single throttle body models

• High Air Flow with Excellent Filtration
• Designed to Increase Horsepower and Acceleration
• Washable and Reusable
• Will NOT Void Vehicle Warranty
• Lasts up to 50,000 miles before cleaning is required depending on driving conditions
• K&N Million Mile Limited Warranty�
• Emissions Legal
• Economical, a K&N Air Filter Will Last the Life of Your Bike
• Works with Original Equipment Manufacturer Vehicle Electronics
• Easy High Performance Add-on
• Environmentally Friendly

AP8104924

Dimensions:
180mm x 125mm x 38mm

Air filter, flat paper cartridge type for models with single throttle body

See SIA10434 for a reusable performance air filter

AP8104924

Dimensions:
120mm x 80mm x 53mm

High performance aluminium velocity stack for airbox to throttle body union on single throttle body models. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

Here is a video showing how you install it YouTube.

This manifold is suitable for EURO 4 and 5 models not EURO 5+. Manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

Pair of short reverse cone stainless steel performance silencers from Mistral, the satin finish reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

5kg lighter that stock silencers
Increased power
For best results combine with a velocity stack ACA03901 and performance air filter SIA10434 - this combo will improve the low to midrange pickup and power delivery.

Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!

Pair of short reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers. These are the most popular choice for the V7 850 Stone.

5kg lighter that stock silencers
Increased power
For best results combine with a velocity stack ACA03901 and performance air filter SIA10434 - this combo will improve the low to midrange pickup and power delivery.

Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers.You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!

Pair of short reverse cone stainless steel performance silencers from Mistral, the polished reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers. These are the most popular silencer we offer for the V7 850 Special.
5kg lighter that stock silencers
Increased power
For best results combine with a velocity stack ACA03901 and performance air filter SIA10434 - this combo will improve the low to midrange pickup and power delivery.

Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34374 if you have the Guzzi centre stand fitted.

V7 850 Special Edition (factory fitted with Arrow silencers) needs brackets FRA34584

Silencer shims not required

Release the music in your Guzzi!

Hear these silencers over on YouTube.

 This part is available by special order, request a quote

Pair of short reverse cone stainless steel performance silencers from Mistral, the polished reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers. These are the most popular silencer we offer for the V7 850 Special.
2kg lighter that stock silencers
Increased power
For best results combine with a velocity stack ACA03901 and performance air filter SIA10434 - this combo will improve the low to midrange pickup and power delivery.

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

Pair of long reverse cone stainless steel performance silencers from Mistral. The satin finish reverse cone design compliments the classic styling of the V7 models and the silencers are a similar length to the original silencers. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding pair of silencers.
4kg lighter that stock silencers
Benefit from increased power and torque
For best results combine with a velocity stack ACA03901 and performance air filter SIA10434 - this combo will improve the low to midrange pickup and power delivery.

Euro 5 compliant

2BHP power increase at 5000rpm
No remapping required

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34384 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!

Pair of short black reverse cone stainless steel performance silencers with special end caps from Mistral, the reverse cone design compliments the classic styling of the V7 models whilst the special end caps are an nice exclusive finishing touch. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

5kg lighter that stock silencers
Increased power
For best results combine with a velocity stack ACA03901 and performance air filter SIA10434 - this combo will improve the low to midrange pickup and power delivery.

The ultimate V7 850 silencers
Euro 5 compliant
No remap required
Includes mounting brackets
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!