Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease

This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).

Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.

 This part is due back in stock soon, call 01484 841395 to reserve yours

 39659000 GU39659000 39 65 90 00
 3965 9000 3965.9000 39.65.90.00

Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4

Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Cagiva Elefant E750, Ducati 748

Engine Bottom End. Doesn't include pistons, barrels, engine head. Engine Turns over. Supplied without charging or ignition system. Mileage unknown (likely less than 30k miles).

Collection only, spares or repair. Can be supplied as part of a engine kit package for project bikes, Triking, JZR or Pembleton three wheelers, call us to discuss.

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 We need to check whether we have stock of this part, check availability

PX00700

Engine bottom end doesn't include Pistons , barrels, Engine Head or flywheel. Engine Turns over. Supplied without charging or ignition system. Mileage unknown (likely less than 30k miles).

Collection only, spares or repair.

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 1 in stock, request a quote

PX0021

Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750

This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit

 4 in stock

 17659352 GU17659352 17 65 93 52
 1765 9352 1765.9352 17.65.93.52

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1

Kit containing 2 Litres of Millers Pistoneeze SAE20-50 mineral engine oil, 1 litre of Extreme Pressure gearbox oil and 1 litre of final drive oil. This kit contains all the oil you will need to change your engine, drive box and gearbox oil

See TOA19001 for a inexpensive tool to loosen and tighten the dipstick
Please note this kit CANNOT be posted outside of the UK mainland area

 2 in stock

Profesionally rebuilt Brembo PS 15 rear master cylinder for models with a remote reservoir. Mounting holes at 50mm centres.

Brembo ref. 10.2934.02
Usually supplied as a bare master cylinder with a piston installed. Spring, operating lever and input elbow may not be included. See BRA19500 for the elbow that the fluid supply pipe fits on to and BRA19667 for the return spring. Send us your old rebuildable (i.e. with a undamaged bore) PS15 for a £10 credit against your next order.

 19667000 GU19667000 19 66 70 00
 1966 7000 1966.7000 19.66.70.00

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement

 This part is due back in stock soon, call 01484 841395 to reserve yours

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Brembo PS 16 rear master cylinder for models with a remote reservoir, suitable as a replacement for the standard PS15 master cylinder which has now been discontinued by Brembo. Mounting holes at 50mm centres

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 Sorry, this part is no longer available.

 19667000 GU19667000 19 66 70 00
 1966 7000 1966.7000 19.66.70.00