Satin finish stainless steel conical silencer with conical end cap. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.3kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

To achieve maximum performance gains also fit link pipe EXA85629, velocity stack EXA85901 and performance air filter SIA10433 with V-Twin boost plug-in FUA85003
Benefits of Mistral silencers:

• Simple assembly
• Low weight
• No remap required
• EURO5+ approved
• Full and deep sound
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Specific carbon fiber heat shield included
• Handcrafted product

 This part is available by special order, request a quote

Premium softstyle black T-shirt printed with classic Moto Guzzi logo in white on the chest.

Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!

Sizing:

• M fits 38 - 40" chest
• L fits 42 - 44" chest
• XL fits 46 - 48" chest
• XXL fits 50 - 52" chest

Steering damper in black finish

Fits to original frame bracket

14530201-z 14530201 GU14530201 14 53 02 01
 1453 0201 1453.0201 14.53.02.01

Dimensions:
9mm ID mounts, 168mm centres minimum, 250mm centres fully extended

Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750

This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit

 17659352 GU17659352 17 65 93 52
 1765 9352 1765.9352 17.65.93.52

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1

Dimensions:
Solid piston 12.7mm OD x 65mm

Motobatt quadflex 30Ah battery. Quadflex technology means you have two positive and two negative threaded terminals allowing maximum flexibility when installing. This powerful battery produces a massive 390 cranking amps, and is rated at 32 ah.

These sealed absorbed glass matt batteries have been used in military and off road applications for many years.
They offer increased lifespan, higher vibration resistance and electrical performance. This battery is also leak, vibration and spill proof if installed correctly.
Supplied fully charged and ready to fit.

NB This battery must not be trickle charged or charged using a traditional manual charger, AGM batteries require a smart charger - we recommend ACA96000
For more information on charging AGM batteries see these FAQ's.

This is a better value replacement for the Odyssey PC925 battery. Replaces Guzzi refs. 14704550, 18704550, 28704550, 28704545, 28704551, 28704552, 14704551, 14704500 and 14704505

One year warranty on all our Motobatt batteries.

Slightly taller than original loop frame battery so you may need to make some modification to retaining bracket

Please note this part CANNOT be posted outside of the UK mainland area

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 03704540 GU03704540 03 70 45 40
 0370 4540 0370.4540 03.70.45.40

Dimensions:
L166mm x W126mm x H175mm

Increased Header Pipes + Crossover Y KIT with NO CAT, specific for Moto Guzzi V85 TT EURO5+. Characteristic of our kit make it the best product that you will find for your V85 TT!

Increased Header Pipes technical features:

Completely made of stainless steel with surface finish like the original one

37mm exhaust valve

Also known as Guzzi ref. 30036110

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 14036150 GU14036150 14 03 61 50
 1403 6150 1403.6150 14.03.61.50

Dimensions:
37mm diameter, 105mm overall height, 8mm stem diameter

Flywheel, originally intended for dual point and Motoplat ignitions

2-33° of ignition advance. Supercedes V7 loop frame flywheel 12067000 . Weighs 4.2kg

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 17067050 GU17067050 17 06 70 50
 1706 7050 1706.7050 17.06.70.50

Dimensions:
230mm diameter

Full workshop manual for 4 valve per cylinder Norge 1200 GT 8V models covering maintenance, overhaul and detailed repair. Includes tolerances for many parts. This is a comb bound reprint.

897237 MG897237

Dimensions:
A4, 357 pages black and white

Workshop manual for V100 Mandello models covering maintenance, overhaul and detailed repair

Includes tolerances for many parts, maintenance schedule and exploded diagrams. This is a comb bound reprint

2Q000541

Dimensions:
A4, 406 pages black and white