Workshop manual for ABS equipped V9 models covering maintenance, overhaul and detailed repair. Note that engine overhaul is covered in a separate supplement - BOA20202

Includes tolerances for many parts, maintenance schedule and exploded diagrams. This is a comb bound reprint

2Q000193

Dimensions:
A4, 193 pages black and white

Full workshop manual for ABS equipped V7 III models covering maintenance, overhaul and detailed repair. Note that this manual does not include detailed engine overhaul

Includes tolerances for many parts, maintenance schedule and exploded diagrams. This is a comb bound reprint

2Q000297

Dimensions:
A4, 320 pages black and white

Pair of ignition points (made up of Guzzi part numbers 14715429 and 14715430)

 14719800 GU14719800 14 71 98 00
 1471 9800 1471.9800 14.71.98.00

Final drive inner output seal

For Breva 750 from frame no. LL111908

90407591-z 90407591 GU90407591 90 40 75 91
 9040 7591 9040.7591 90.40.75.91

Dimensions:
95mm OD

Front crank oil seal for models with Bosch or Ducati charging systems

Also known as Guzz ref. 90402839

 90402840 GU90402840 90 40 28 40
 9040 2840 9040.2840 90.40.28.40

Dimensions:
28mm x 38mm x 7mm

Dust cover for fork stanchion, seals against stanchion to protect fork seal.

28524500-z 28524500 GU28524500 28 52 45 00
 2852 4500 2852.4500 28.52.45.00

Dimensions:
52mm internal diameter at large end, 38mm internal diameter at narrow end

Oil pressure sender, M12 thread, male bullet connector

This oil pressure sensor supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.

See ENA12640 for replacement crush washer if required

 17768750 GU17768750 17 76 87 50
 1776 8750 1776.8750 17.76.87.50

Dimensions:
M12 thread, 46mm x 21mm bolt flats

Small front battery strap

14704800-z 14704800 GU14704800 14 70 48 00
 1470 4800 1470.4800 14.70.48.00

Dimensions:
240mm x 43mm x 8mm overall

Lower Gasket for oil sump flange

See ENA14036 for upper sump flange gasket

01003600-z 01003600 GU01003600 01 00 36 00
 0100 3600 0100.3600 01.00.36.00

Dimensions:
305mm x 270mm overall

High quality German made Mahle OE quality cartridge oil filter with sealing rubber.

From late 2015 onwards 1200 models used SIA06428

Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filter which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring and SIA10900 for the sump plug seal

 30153000 GU30153000 30 15 30 00
 3015 3000 3015.3000 30.15.30.00

Dimensions:
75mm diameter overall