Air filter, flat paper cartridge type

See SIA10433 for a reusable K & N air filter

AP8104329

Dimensions:
180mm x 125mm x 38mm

K&N high performance air filter, flat paper cartridge type

• High Air Flow with Excellent Filtration
• Designed to Increase Horsepower and Acceleration
• Washable and Reusable
• Will NOT Void Vehicle Warranty
• Lasts up to 50,000 miles before cleaning is required depending on driving conditions
• K&N Million Mile Limited Warranty�
• Emissions Legal
• Economical, a K&N Air Filter Will Last the Life of Your Bike
• Works with Original Equipment Manufacturer Vehicle Electronics
• Easy High Performance Add-on
• Environmentally Friendly

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

AP8104329

Dimensions:
180mm x 125mm x 38mm

High performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4, 5 but does not fit Euro 5+ models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10433 and V-Twin Boost - ACA85001 or ACA85002.

Customer Kev fitted this combo and called us the next day to say that his V85TT was transformed; the fluffy throttle response between 2k and 3k was gone and the engine pulled better. Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

Performance 2-1 connecting pipe or H pipe. This mid pipe is less than half the weight of the original pipe and will make a significant improvement to both the exhaust note and performance of your V85 TT when combined with a performance silencer and air filter SIA10433

Gaskets not required with this crossover, the Y piece fits direct. A performance exhaust crossover for your V85TT

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

Performance 2-1 connecting pipe, de-CAT or H pipe. This mid pipe is 2kg lighter than the original pipe and will make a significant improvement to both the exhaust note and performance of your V85 TT when combined with a performance silencer and air filter SIA10433. We also recommend fitting a V-Twin Boost plug-in FUA85001 with this CAT eliminator to enrich the mixture

• Y piece made from AISI304 stainless steel
• Installation with graphite bushings to limit the transmission of vibrations
• Fixing bracket with antivibration silent block
• Straight through design for better performance and deeper sound
• Larger diameter internals for better exhaust gas flow
• This crossover is compatible with original system components
• Reduces engine operating temperature for better fuel consumption and efficiency
• Includes exhaust bushes
• Modern satin finish
• Manufactured on the shores of Lake Como and developed using a rolling road

Polished stainless steel conical silencer. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

To achieve maximum performance gains also fit header and link pipe kit EXA85629 and performance air filter SIA10433 with V-Twin boost plug-in FUA85002
Benefits of Mistral silencers:

• Simple assembly
• EURO5 approved
• Low weight
• No remap required
• Best sound and performance
• Specific bracket included
• No remap required
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Specific carbon fiber heat shield included
• Handcrafted product
• More than 2hp gain

Satin finish stainless steel conical silencer. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

To achieve maximum performance gains also fit link pipe EXA85629, velocity stack EXA85901 and performance air filter SIA10433 with V-Twin boost plug-in FUA85002
Benefits of Mistral silencers:

• Simple assembly
• EURO5 approved
• Low weight
• No remap required
• Best sound and performance
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Specific carbon fiber heat shield included
• Handcrafted product
• More than 2hp gain

Black stainless steel conical silencer with brushed stainless steel end cap. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

To achieve maximum performance gains also fit link pipe EXA85629, velocity stack EXA85901 and performance air filter SIA10433 with V-Twin boost plug-in FUA85002
Benefits of Mistral silencers:

• Simple assembly
• Low weight
• No remap required
• No remap required
• EURO5 approved
• Best sound and performance
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Specific carbon fiber heat shield included
• Handcrafted product
• More than 2hp gain

Black Anodized stainless steel conical silencer with brushed stainless steel end cap. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

Supplied with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer. To achieve maximum performance gains also fit link pipe EXA85699, velocity stack EXA85901 and performance air filter SIA10433 with V-Twin boost plug-in FUA85001
Benefits of Mistral silencers:

• Simple assembly
• Low weight
• No remap required
• EURO4 approved
• Best sound and performance
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Removable DB-Killer
• Specific carbon fiber heat shield included
• Handcrafted product
• More than 2hp gain

Satin finish stainless steel conical silencer. Developed by Mistral for maximum performance using their in-house dyno. Hand made to order on the shores of Lake Como. Easy to install using existing mounting points.

As well as looking and sounding better than the stock silencer this performance exhaust is 2.7kg lighter and offers a useful increase in power and torque.
See this video to hear this silencer

Supplied with removable baffle. The baffle is easily removed by taking off the retaining circlip in the rear of the silencer. To achieve maximum performance gains also fit link pipe EXA85699, velocity stack ACA85901 and performance air filter SIA10433 with V-Twin boost plug-in FUA85001

Benefits of Mistral silencers:

• Simple assembly
• EURO4 approved
• Low weight
• No remap required
• Best sound and performance
• Specific bracket included
• Same position as the original exhaust: compatibility with side bags and Guzzi accessories
• Removable DB-Killer
• Specific carbon fiber heat shield included
• Handcrafted product
• More than 2hp gain