Dimensions:
M10 conventional thread, approx. 240mm reach to far edge of mirror, mirror 110mm diameter
Black handlebar mounted mirror. Conventional M10 thread, head is threaded for left or right hand fitment.
Supercedes BUMM mirror HAA36021W. See ACA00101 for a black mirror extender kit to extend the reach of this mirror.
2 in stock
£18.00
INC VAT
£15.00 EX VAT
Complete Speedo (odometer) cable for models with black face ITI speedo
We advise you to measure your existing cable and check that your speedo is made by ITI before ordering in case you have a non standard set up.
3 in stock
03760465-z 03760465 GU03760465 03 76 04 65
0376 0465 0376.0465 03.76.04.65
£12.50
INC VAT
£10.42 EX VAT
14 sided oil filter tool for Mahle filter SIA15301. Also fits the latest 14 sided version of the oil filter fitted to late CARC models.
This tool is for models where the sump needs to be removed to get to the oil filter. Not suitable for Champion or UFI oil filters
3 in stock
£12.00
INC VAT
£10.00 EX VAT
One metre of copper core HT lead, this is superior to the more commonly available carbon core lead
Sold by the metre, one metre is enough for two leads on most models with coils under the fuel tank. For models with coils under the side panel you will need two metres. See ELA14715 and ELA14714 for plug caps and ELA20001 for coil screw cap. See ELA00001 for crimp on HT lead connector
More than 5 in stock
£7.00
INC VAT
£5.83 EX VAT
Gearbox output seal on later small twins (V50 3 and V35 II on) and all V65 and 750cc models. Also gearbox input seal on V50 3, V35 II, V35 III, Imola, V35 Florida, V35C, V50C, Monza
Replaces Guzzi ref. AP9150435 and 886629
More than 5 in stock
90402841 GU90402841 90 40 28 41
9040 2841 9040.2841 90.40.28.41
£9.00
INC VAT
£7.50 EX VAT
The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.
Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:
3 in stock
£33.00
INC VAT
£27.50 EX VAT
High quality German made Mahle OE quality cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring
More than 5 in stock
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£9.25
INC VAT
£7.71 EX VAT
One metre of copper core HT lead, this is superior to the more commonly available carbon core lead
Sold by the metre, one metre is enough for two leads on most models with coils under the fuel tank. For models with coils under the side panel you will need two metres. See ELA14715 and ELA14714 for plug caps and ELA20001 for coil screw cap. See ELA00001 for crimp on HT lead connector
More than 5 in stock
£7.00
INC VAT
£5.83 EX VAT
5 pin mini relay
Also known as Guzzi ref. 30732560 Can be used in place of 4 pin mini relay ELA01561. We recommend keeping a spare one in your tool kit
More than 5 in stock
01731760 GU01731760 01 73 17 60
0173 1760 0173.1760 01.73.17.60
£14.00
INC VAT
£11.67 EX VAT
Dellorto mixture screw for PHF36 and PHM40 carbs
Check your mixture screw length as Guzzi used two lengths, this one and the screw in kit FUA93936
2 in stock
30936210 GU30936210 30 93 62 10
3093 6210 3093.6210 30.93.62.10
£10.90
INC VAT
£9.08 EX VAT