Zadi ignition switch with 2 keys
4 male spade type connectors on underside, replaces original switch with bullet connectors. See ELA10005 for female spade connectors and FRA19741 for rubber wiring boot
More than 5 in stock
31735360 GU31735360 31 73 53 60
3173 5360 3173.5360 31.73.53.60
Also fits Benelli 750 Sei (series 2) - fits with minor modification
£31.00
INC VAT
£25.83 EX VAT
1 litre of Millers 80w-90 mineral based transmission oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals
An extreme pressure differential oil SAE 80w90 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.
Provides performance level specified by manufacturers for gearboxes and final drives.
Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. API GL-5
Quantities required:
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
Brand new genuine Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016
Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
This is a genuine Valeo starter made in the EU- please do not confuse with the cheap Chinese copies that sometimes appear on eBay.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Please note you can get a discount of £30 on this item if you part exchange your existing faulty starter motor. See ELA30837 for less expensive alternative part
This part is due back in stock soon, call 01484 841395 to reserve yours
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£231.00
INC VAT
£192.50 EX VAT
Complete cast side stand kit with springs, pivots and mounting brackets finished in black. This kit is supplied with two sidestand brackets so you can mount the stand in either the standard position under the riders footpeg, or in the forward position on the engine mounting bolt (for a Le Mans style getaway).
This stand is supplied ready for fitting in the forward position, swap supplied brackets and spring brackets to mount in the rear position under the rider's footpeg
Bolts to either engine mounting bolt at front of lower framerail (check that you have a long enough front engine mounting bolt for this sidestand to fit on to) or the lower frame rail. This can be fitted to other Tonti frame models with footpegs (e.g. Le Mans 2, Le Mans 3, T3, T4).
Requires final paint finish before fitting.
Supercedes Guzzi ref. 28432161
Availability varies on this part, check availability
28432160 GU28432160 28 43 21 60
2843 2160 2843.2160 28.43.21.60
£126.80
INC VAT
£105.67 EX VAT
Replacement seal to fix your leaking factory pannier
One seal required per pannier. Not for aluminium luggage.
Sorry, this part is no longer available.
883246 MG883246
Sorry this item is out of production
Black finish stainless steel reverse cone silencer. Developed by Mistral for maximum performance using their in-house dyno. The unique shape compliments the styling of the Rebel whilst internally all new components manage the gas flow to improve torque and power.
As well as looking and sounding better than the stock silencer this performance exhaust is 5kg lighter and offers a useful increase in power and torque.
Indlcudes heatshield and laser cut silencer bracket.
Benefits of Mistral silencers:
This part is available by special order, request a quote
£450.00
INC VAT
£375.00 EX VAT
Oil pressure sender, M12 thread, male bullet connector
Supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.
See ENA12640 for replacement crush washer if required
More than 5 in stock
17768750 GU17768750 17 76 87 50
1776 8750 1776.8750 17.76.87.50
£10.00
INC VAT
£8.33 EX VAT
Dimensions:
A4 - 134 pages black & white
Guzzi Base Workshop Manual for all V35 & 50 models. 134 pages covering the basics for all V35 & V50 models
Much of the information in this manual is also relevant to V65, V75 and 750 small twins. Use this manual in combination with the relevant supplement if your small twin isn't a V35 / V50 mark 1 or 2.
This manual includes common torque settings for small twins.
Order now and we will post your order within 7 days.
23920181 GU23920181 23 92 01 81
2392 0181 2392.0181 23.92.01.81
£21.00
(VAT exempt)
£21.00 EX VAT
Condenser with mount bracket
2 required
This part is due back in stock soon, call 01484 841395 to reserve yours
19708620 GU19708620 19 70 86 20
1970 8620 1970.8620 19.70.86.20
£7.30
INC VAT
£6.08 EX VAT
Bridgestone Battlax 120/90-18 speed rated to 130 MPH.
Bridgestone's Battlax BT46 replaces the iconic Battlax BT-45. The iconic BT-45 was upgraded with a new modern design that increases wet performance with no impact on its well-known dry handling performance and high mileage. RC Polymer technology optimizes the distribution of silica in the rubber compound and improves tread flexibility, allowing greater contact with the road surface in both hot and cold conditions. The reduction in molecular friction also improves rolling resistance, therefore increasing fuel economy.
Order now and we will post your order within 7 days.
BT46
£145.00
INC VAT
£120.83 EX VAT