The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

New Spares Recently Back In Stock

Sort by Title

Sort by Price

Page 13 of 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Wheel Bearing

WHA92221 Fits Breva 750, Nevada 750, Strada 750, 750T, Nevada ALL, Lario, V7 Classic, V7 Racer, V7 Special, V9 Roamer, V9 Bobber, V7 Cafe (2008-2016), V7 II Racer, V7 II Special, V7 II Stone, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Cali 2, Spada ALL, T3, T4, T5, G5 (cast wheel), Mille GT (cast wheel), Cali 3 (cast wheel), Strada 1000 (cast wheel), Convert (cast wheel), 1000S (cast wheel), 750 Targa, Strada 750, V7 850 ALL

Dimensions:
42mm OD

Front wheel bearing, sealed

2 bearings required per wheel, Also used as rear wheel bearing on V7 850

part in stock More than 5 in stock

92204221 GU92204221 92 20 42 21
9220 4221 9220.4221 92.20.42.21

£10.80

INC VAT

£9.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads F05 Calipers EBC FA047

BRA19724 Fits V35 ALL, V50 ALL, V65 ALL, V75, 750 Targa, Strada 750, Daytona ALL, 1100 Sport ALL, Centauro, V11 Sport, Nevada 750 (1991-2002), Nevada 350, 750 SP, 750T

Dimensions:
7mm overall thickness

Pair of EBC FA047 brake pads for Brembo F05 (P5) calipers and Grimeca front calipers

part in stock More than 5 in stock

27654610-z 27654610 GU27654610 27 65 46 10
2765 4610 2765.4610 27.65.46.10

Also fits Benelli 250 TS, Ducati Pantah 500SL, Magni Sfida

£17.00

INC VAT

£14.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Seal

GEA90435 Fits V7 700, V7 Special, 850 GT, V7 Sport, 750S, S3, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, 1100 Sport ALL, Centauro, Quota 1100, V35 ALL, V50 ALL, V65 ALL, Nevada 750 (1991-1997), 750 SP, Strada 750, 750T, 750 Targa, Nuovo Falcone, V7 700, V7 Special (1969-1971), Nuovo Falcone, Bellagio, Daytona, Centauro, Griso 850, Griso 1100, Norge (2v/cyl), 1200 Sport (2v/cyl), Breva ALL, V7 Cafe, V7 Racer, V7 Special, V7 Stone, V7 Classic, V7 II, V7 III ALL

Dimensions:
47mm OD

Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes

Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549

part in stock More than 5 in stock

90403548 GU90403548 90 40 35 48
9040 3548 9040.3548 90.40.35.48

£18.50

INC VAT

£15.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Crank Oil Seal Rear

ENA90367 Fits V7 Sport, 750 S3, 750S, V7 700, V7 Special (1969-1971), 850 GT, 850/1000 All Models, 1100 Sport ALL, 1200 Sport, Centauro, Daytona, Quota ALL, Cali 1100 (1994-1997), Cali EV, V35 ALL, V50 ALL, V65 ALL, V75 ALL, Strada 750, 750 Targa, 750 SP, Nevada 350 (1991-1998), Nevada 750 (1991-1998), V11 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Stelvio, Norge, Griso, Cali 1400 ALL

Dimensions:
68mm OD

Rear crankcase oil seal or rear main oil seal.

Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch

part in stock More than 5 in stock

90405367-z 90405367 GU90405367 90 40 53 67
9040 5367 9040.5367 90.40.53.67

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M10 Bleed Nipple

BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
M10 x 1

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function on this auto bleed valve, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover
More than 5 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 6mm Stainless Steel

SSA00470 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT, Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
10mm threaded shank, 8mm across flats

A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787

See BRA36794 for rubber cap

part in stock More than 5 in stock

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Agip Fork Oil 5W

OIA02005 Universal Part

Dimensions:
1 litre

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

part in stock More than 5 in stock

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Fork Seal

SUA01530 Fits Daytona 1000, 1100 Sport Carb, Quota ALL

Dimensions:
41.7mm x 55mm x 7.5/10mm

Fork seal for Marzocchi M1R forks

part in stock 3 in stock

30530502-z 30530502 GU30530502 30 53 05 02
3053 0502 3053.0502 30.53.05.02

Also fits Laverda SFC1000

£10.50

INC VAT

£8.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Fork Seal

SUA30861 Fits Cali 1100 (1994-1997), T5 Police (1995-2001)

Dimensions:
40mm ID x 52mm OD

Fork seal

part in stock 5 in stock

30532861 GU30532861 30 53 28 61
3053 2861 3053.2861 30.53.28.61

£8.90

INC VAT

£7.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Flasher Unit Round

ELA17520 Fits 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, V11 Sport, Daytona, Centauro, 1100 Sport

Dimensions:
32mm diameter

Round 12v two pin flasher relay

See FRA17720 for rubber mount

part in stock More than 5 in stock

17750520 GU17750520 17 75 05 20
1775 0520 1775.0520 17.75.05.20

£7.60

INC VAT

£6.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 13 of 16

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16