Inlet rubber with HT lead guide

Fits between exhaust manifold on cylinder head and carb. Use hose clip SSA45970. Suitable for PHF30 and PHF36 carbs

 More than 5 in stock

14114350-z 14114350 GU14114350 14 11 43 50
 1411 4350 1411.4350 14.11.43.50

Complete cast side stand with springs, pivot and mounting bracket finished in black. This stand is the original flip up / self retracting type

Bolts to engine mounting bolt at front of lower framerail, check that you have a long enough front engine mounting bolt for this sidestand to fit on to. This can be fitted to other Tonti frame models (e.g. Le Mans 1000). See FRA28162 for bracket that enables this stand to be mounted near the rider's footrest using the gearbox mounting bolt.

 1 in stock

17432060-z 17432060 GU17432060 17 43 20 60
 1743 2060 1743.2060 17.43.20.60

Throttle cable for models with standard high top PHF pumper carbs

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 4 in stock

 14117555 GU14117555 14 11 75 55
 1411 7555 1411.7555 14.11.75.55

Top end gasket and seal set containing rocker cover, base and head gaskets plus top end O rings

Top end gasket set for one cylinder. Inlet manifold gasket ENA14550 or ENA14500 and exhaust gasket ENA90718 available separately

 More than 5 in stock

Rear hugger finished in matte black, this will protect your rear shock from road spray and grit. Mounts via three pre drilled holes and supplied brackets

Similar matte finish to front mudguard MUA00244 .
Supplied with brackets and fasteners. See here for fitting instructions. Fitment of this hugger requires some mechanical skill- if in doubt please entrust this job to a professional

 1 in stock

Black plastic front mudguard extension or Fenda Extenda. This will protect the exhaust pipes and front engine cover on your Guzzi from road debris, salt, water and traffic grime thrown up by your front wheel

Specifically designed to follow the contour of your bike's front guard, our Extenda Fenda is supplied with both plastic rivets for mechanical fitment and a sheet of our specially sourced 'Stick Fit Pads' for those customers who would prefer not to drill their front mudguard. Our Extenda Fenda is simple to install and will arrive safely packaged, together with comprehensive fitting instructions and all necessary fittings as detailed above. See this video for help fitting yours

 2 in stock

5 pin mini relay

Also known as Guzzi ref. 30732560 Can be used in place of 4 pin mini relay ELA01561. We recommend keeping a spare one in your tool kit

 More than 5 in stock

 01731760 GU01731760 01 73 17 60
 0173 1760 0173.1760 01.73.17.60

Brand new budget starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016 Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.

Supercedes Guzzi refs. 12730705, 14730554 and 14730705

Get a discount of £20 on this item if you part exchange your existing faulty Valeo or Bosch starter motor.

 1 in stock

 30730711 GU30730711 30 73 07 11
 3073 0711 3073.0711 30.73.07.11

Performance deCAT kit for EURO5 models containing a set of big bore header pipes and 2-1 connecting pipe (H pipe) without CAT. The big bore downpipes improve exhaust gas flow resulting in improved torque and power though the rev range. The dowpipes are 50% lighter than the originals and combined with the 2kg weight saving from the mid pipe you'll see a noticable weight saving. Also available with a CAT by special order - enquire for details. This kit will also improve the exhaust note but for optimum results combine with a Mistral performance silencer and air filter SIA85433. We also recommend fitting a V-Twin Boost plug-in FUA85001 with this CAT eliminator to enrichen the mixture

• No remapping required
• CNC exhaust flanges included
• Significant weight saving
• Top spec AISI304 stainless steel (no rust!)
• Y piece is compatible with original heat shields and lambda probes
• Installation with graphite bushings to limit the transmission of vibrations
• Fixing bracket with antivibration silent block
• Straight through design for better performance and deeper sound
• Larger diameter internals for better exhaust gas flow
• Crossover is compatible with original system components
• Reduces engine operating temperature for better fuel consumption and efficiency
• Includes exhaust bushes (normal cost £30) and exhaust header gaskets
• Manufactured on the shores of Lake Como and developed using a rolling road

 1 in stock

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's. The V85 TT runs particularly lean and will benefit more than most bikes from the installation of a V-Twin Boost.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

 1 in stock