Dellorto V5 slide needle for VHB 30 carbs. The original V9 needle has limited availability and this is the closest alternative. Drop the V5 needle by one groove to simulate the V9 needle

Standard needle clip position is 2nd groove from top

 This part is available by special order, request a quote

 13937700 GU13937700 13 93 77 00
 1393 7700 1393.7700 13.93.77.00

Pair of Italian black rubber fork gaitors for 35mm forks

Made in Italy by Ariete

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of genuine Guzzi black rubber fork gaitors for OE forks. Also known as 2B003514

 This part is available by special order, request a quote

606688M

Air filter, flat paper cartridge type

See SIA10425 for a reusable performance air filter

 This part is due back in stock soon, call 01484 841395 to reserve yours

AP8104242

Spark plug cap for single throttle body models

Also known as suppressor cap Guzzi ref 2D000005 and 2D000247

 1 in stock

 02717450 GU02717450 02 71 74 50
 0271 7450 0271.7450 02.71.74.50

Pair of organic EBC FA244 front brake pads for P4 30/34 F calipers with two pad pins (Brembo 6800 and 9970 calipers)

Guzzi pad reference is 01654630. Also fitted to some pre 2001 Cali EV's - check how many pins your brake caliper has if ordering for a 1997-2001 Cali EV. Also known as Guzzi ref. 2B003313, 61340211A, 01654630, 07670810, 07BB1935, AP8133614, 883673, 2B005736

 More than 5 in stock

 32654610 GU32654610 32 65 46 10
 3265 4610 3265.4610 32.65.46.10

Pair of polished reverse cone stainless steel performance silencers for special builds and projects. Supplied with removable DB killer these are durable, stylish, lightweight and sound fantastic.

Also available in satin or black finishes

Designed for use on project bikes and one off builds these silencers are supplied without brackets and have a straight 50mm entry pipe (before the reverse cone). Overall silencer length is approximately 50cm.

All Mistral exhausts are hand made in Mandello to order using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers.
Also available in satin or black finish

Release the music in your Guzzi!
See this video to hear this silencer

 This part is available by special order, request a quote

1 metre of Ariete fuel pipe suitable for fuel and breather pipe applications on gravity fed non injection models, cut your fuel lines to your own spec

Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004

 More than 5 in stock

Satin finish Avion performance silencer. Full deep sound enhances the V-twin engine note and you'll appreciate the extra 2hp that is released. It's also a full kilo lighter than the stock part. Distinctive Avion styling and shorter length compliments the V100 Mandello. Includes carbon fibre heat shield.
Mistral focused the development on the technical details that characterize this exhaust, performing something of unique. Thanks to a different internal construction Mistral saved about 1 kilogram compared to the stock silencer and improved performance, not that the bike was lacking but more fluidity and torque is always a good thing to have. The final endcap, totally milled from a block of aluminum, ensure an unique and valuable look that combined with the carbon fibre heat shield match perfectly the sportly character of the bike.

• CNC machined end cap made by Anticorodal
• 1 kg lighter than stock
• 10% more torque off tickover
• Full and deep sound
• Specific heat shield and bracket included
• dB-Killer compliant with EURO5 regulations
• Compatible with the standard factory centre stand
• +2 HP e + 1 Nm (+ 3 HP increase If combined with Racing Air Filter SIA09776 )
• Laser engraved MISTRAL logo

 This part is available by special order, request a quote

Alternator upgrade kit for Bosch systems containing stator windings, wound rotor and replacement diode board. The superior design alternator has an output up to 300% greater than the original Bosch system. You may wish to fit a plastic alternator spacer ENA18150 if your model does not have one of these already (to improve cooling of the alternator). You will need front crank seal ENA90428 (Bosch seal) if you wish to fit this to a bike with a Saprisa charging system. This kit reuses your existing Bosch regulator and stator plate with brush holder, see ELA29703 for a replacement regulator and ELA17452 for brush holders.

Note that it will be necessary to extend some wiring and modify the diode board mountings in order to fit this kit.

• Outputs 600W @5000 RPM
• Supplied with rotor removal tool
• For tapered crankshafts

1. Remove stator and rotor using the supplied rotor removal tool
2. Remove the old stator windings from the stator plate
3. Solder in the new stator widing wires to the connection block on the stator plate and reconnect the
4. Mount the replacement diode board, this should be protected from the weather but cooled by passing air
5. Connect up the system as follows: Terminals U,V and W take the three yellow wires which should be connected to the stator plate block; Y goes to Y on the stator plate; The brown wires go to earth (we recommend using some earth sleeve on these if possible); Red goes to the battery positive terminal; regulator wiring remains as before (D+ to diode board, D- to earth and DF to brush holder)
6. Check charge warning light is working (earth DF wire at stator to check bulb function)
7. Turn motor over by hand to ensure everything is seated correctly, there should be an air gap between the stator windings amd rotor
Fit alternator cover and spacer

 This part is available by special order, request a quote