Head gasket
Can be used in place of ENA19062 and Guzzi ref. B063099 but it is recommended to use a gasket sealant for this application
More than 5 in stock
27022060-z 27022060 GU27022060 27 02 20 60
2702 2060 2702.2060 27.02.20.60
£11.20
INC VAT
£9.33 EX VAT
Dust cover for fork leg, seals against stanchion to protect fork seal
More than 5 in stock
14524500-z 14524500 GU14524500 14 52 45 00
1452 4500 1452.4500 14.52.45.00
£11.50
INC VAT
£9.58 EX VAT
Dust cover for fork leg, seals against stanchion to protect fork seal
More than 5 in stock
14524500-z 14524500 GU14524500 14 52 45 00
1452 4500 1452.4500 14.52.45.00
£11.50
INC VAT
£9.58 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
More than 5 in stock
£8.20
INC VAT
£6.83 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT
5 pin 12 volt relay suitable for starter, lights, indicator, flasher and horn applications
Supercedes Guzzi ref. 12732500. Equivalent to 28732500 but with mounting bracket
5 in stock
19732500-z 19732500 GU19732500 19 73 25 00
1973 2500 1973.2500 19.73.25.00
£15.20
INC VAT
£12.67 EX VAT
Titanium rocker feed and breather M8 banjo bolt
Made specially for Gutsibits in corrosion resistant grade 5 titanium. Use with SIA12200 crush washer
More than 5 in stock
95990037 GU95990037 95 99 00 37
9599 0037 9599.0037 95.99.00.37
£8.00
INC VAT
£6.67 EX VAT
1 litre of Millers 80w-90 mineral based transmission oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals
An extreme pressure differential oil SAE 80w90 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.
Provides performance level specified by manufacturers for gearboxes and final drives.
Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. API GL-5
Quantities required: