Shop headings: New Spares | Used Spares | Accessories | Brands
14 Results - Page 1 of 2
Complete cast side stand kit with springs, pivots and mounting brackets finished in black. This kit is supplied with two sidestand brackets so you can mount the stand in either the standard position under the riders footpeg, or in the forward position on the engine mounting bolt (for a Le Mans style getaway).
This stand is supplied ready for fitting in the forward position, swap supplied brackets and spring brackets to mount in the rear position under the rider's footpeg
Bolts to either engine mounting bolt at front of lower framerail (check that you have a long enough front engine mounting bolt for this sidestand to fit on to) or the lower frame rail. This can be fitted to other Tonti frame models with footpegs (e.g. Le Mans 2, Le Mans 3, T3, T4).
Requires final paint finish before fitting.
Supercedes Guzzi ref. 28432161
Availability varies on this part, check availability
28432160 GU28432160 28 43 21 60
2843 2160 2843.2160 28.43.21.60
£126.80
INC VAT
£105.67 EX VAT
Complete cast side stand with springs, pivot and mounting bracket finished in black. This stand is the original flip up / self retracting type
Bolts to engine mounting bolt at front of lower framerail, check that you have a long enough front engine mounting bolt for this sidestand to fit on to. This can be fitted to other Tonti frame models (e.g. Le Mans 1000). See FRA28162 for bracket that enables this stand to be mounted near the rider's footrest using the gearbox mounting bolt.
This part is due back in stock soon, call 01484 841395 to reserve yours
17432060-z 17432060 GU17432060 17 43 20 60
1743 2060 1743.2060 17.43.20.60
£99.00
INC VAT
£82.50 EX VAT
Stainless steel fasteners kit for PHF and PHM carb models with sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike
This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 149 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)
More than 5 in stock
£85.00
INC VAT
£70.83 EX VAT
Stainless steel fasteners kit for VHB carb models with sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike
This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 149 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)
More than 5 in stock
£85.00
INC VAT
£70.83 EX VAT
Stainless steel fasteners kit for PHF and PHM carb models without sump extension.This kit contains nuts, bolts and washers for the following: distributor clamp, rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike
This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 149 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)
More than 5 in stock
£85.00
INC VAT
£70.83 EX VAT
Stainless steel fasteners kit for VHB carb models without sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike
This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 145 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)
More than 5 in stock
£85.00
INC VAT
£70.83 EX VAT
Cast side stand
Bolts to engine mounting bolt at front of lower framerail, check that you have a long enough front engine mounting bolt for this sidestand to fit on to. This can be fitted to other Tonti frame models (e.g. Le Mans 1000). See FRA28162 for bracket that enables this stand to be mounted near the rider's footrest using the gearbox mounting bolt.
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
We need to check whether we have stock of this part, check availability
17432060 GU17432060 17 43 20 60
1743 2060 1743.2060 17.43.20.60
Prices from
£48.00 - £75.00
inc VAT dependent on condition
Front engine mounting bolt for models where the sidestand is not bolted through the engine mounting bolt. See SSA14450 for alternative part
Also known as Guzzi ref. 03429500
Sorry, this part is no longer available.
14429500 GU14429500 14 42 95 00
1442 9500 1442.9500 14.42.95.00
Sorry this item is out of production
Stainless steel front engine mounting stud kit. Kit contains one long engine M12 x 1.25 threaded stud (with plain section in centre), two M12 half nuts, two M12 crinkle washers and four standard M12 washers - all in A2 stainless steel
The original bolts are prone to seizing in place so we recommend replacing with this quality stainless part. Also known as Guzzi ref. 03429500, 14429505
Differs from original part whcih is a bolt, this stud make is easier to fine tune the position of the stud between header pipes
This part is available by special order, request a quote
14429500 GU14429500 14 42 95 00
1442 9500 1442.9500 14.42.95.00
£26.00
INC VAT
£21.67 EX VAT
Front engine mounting bolt for models where the sidestand is not bolted through the engine mounting bolt. See SSA14450 for alternative part
Also known as Guzzi ref. 03429500, 14429505
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock, request a quote
03429500 GU03429500 03 42 95 00
0342 9500 0342.9500 03.42.95.00
£10.00
INC VAT
£8.33 EX VAT