The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop

New Spares Recently Back In Stock

Sort by Title

Sort by Price

Page 17 of 24

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Carburettor Overhaul Kit Dellorto PHF36

FUA14939 Fits Le Mans 1, Le Mans 2, Le Mans 3, Strada 1000, Cali 3 (PHF 36 carb), Cali 1100 (PHF 36 carb), Spada 3

Carb gasket kit / rebuild kit for 1 Dellorto PHF carb. Suitable for all PHF carbs with accelerator pumps including PHF36. Dellorto ref. 52514-77

Carb overhaul kit, float bowl seal FUA90001 and fuel filter FUA60888 also available separately to this carb seal kit

part in stock More than 5 in stock

14939950 GU14939950 14 93 99 50
1493 9950 1493.9950 14.93.99.50

Also fits Hesketh, Laverda

£18.75

INC VAT

£15.62 EX VAT this is the price you will pay if you are ordering from outside the UK

Speedo Sensor Non ABS

ELA81985 Fits 1200 Sport ALL, Breva 850, Breva 1100, Breva 1200

Dimensions:
100cm lead, 20mm OD sensor

Speedo sensor with 100cm lead and 3 pin plug for non ABS equipped models

part in stock 1 in stock

AP8124985

£252.00

INC VAT

£210.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Seal

EXA05230 Fits 1200 Sport, Breva 850, Breva 1100, Breva 1200, Griso ALL, Norge ALL, Stelvio

Dimensions:
55mm ID X 60mm OD x 27mm

Silencer clamp gasket / shim or muffler gasket used to seal crossover to silencer

This exhaust bush is not required if a Mistral or Agostini silencer is fitted

part in stock 1 in stock

05128230 GU05128230 05 12 82 30
0512 8230 0512.8230 05.12.82.30

£25.00

INC VAT

£20.83 EX VAT this is the price you will pay if you are ordering from outside the UK

LED Indicator Complete Rear Left or Front Right

LIA85439 Fits V7 III ALL, V9 ALL, V7 850 ALL, V85TT

Complete LED indicator with lead. Fits front right or rear left

part in stock 1 in stock

2D000439

£45.00

INC VAT

£37.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Fluid Pipe Black 49cm

BRA00011 Universal Part

Dimensions:
49cm x 5mm x 8mm

49cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. We recommend measuring your existing pipe first to check ensure this 49cm pipe will be long enough. This is not long enough for the rear brake master cylinder on V50 II and V35 I

part in stock More than 5 in stock

£8.80

INC VAT

£7.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Banjo Bolt Kit M10 With Bleed Nipple

BRA01006 Universal Part

Dimensions:
M10 x 1

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

part in stock More than 5 in stock

Also fits Benelli 250 TS

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Seal

TRA90247 Fits Nevada 350, Nevada 750 (1991-2001), Lario, V65 Florida, V65, V50 PA, V35 II, V35 I, V35C, V50 I, V50 II, V50 3, NTX 350, NTX 650, V50C, V65C, 750SP, 750 Targa, Strada 750, 850T

Dimensions:
47mm OD

Pinion oil seal for rear drive box on small twins and rear wheel bearing oil seal for 850T

part in stock More than 5 in stock

90403247 GU90403247 90 40 32 47
9040 3247 9040.3247 90.40.32.47

£10.50

INC VAT

£8.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Filter UFI 2546500

SIA19530 Fits V35 I, V35 II, V35 3 (pre 1989), V35C, Imola, Imola 2, V50 I, V50 II, V50 3, V50C, Monza, Monza 2 (pre 1989), V65, Lario, V65 Florida (pre 1989), V35 Florida (pre 1989)

Dimensions:
105mm x 45mm diameter overall

UFI 25 46 500 cartridge oil filter. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick

For post 1989 V35, V50 and V65 models use SIA27300 .
NB Packaging may vary. For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer)

part in stock More than 5 in stock

19153000 GU19153000 19 15 30 00
1915 3000 1915.3000 19.15.30.00

£8.50

INC VAT

£7.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Switch Oil Pressure

ELA31780 Fits 1200 Sport (2006-2007), Bellagio, Breva 850, Breva 1100, Breva 1200, Griso 1100, Norge (2006-2007), Nevada 750 Base/Club (2002-2003)

Dimensions:
M12 x 1 thread, 32mm height from top of thread

Oil pressure switch. May be supplied with a vertical spade connector, this supercedes the original Guzzi part which is no longer available. This version will fit without removal of the alternator

See ENA12640 for replacement crush washer and ELA10005 for female spade connector

part in stock 5 in stock

31768780 GU31768780 31 76 87 80
3176 8780 3176.8780 31.76.87.80

£11.00

INC VAT

£9.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Seal

TRA90850 Fits V7 Sport, V7 700, V7 Special (1969-1971), 850 GT, Cali Vintage, Cali Classic Touring, 850/1000 ALL Models, Cali 1100, Cali EV, 1100 Sport ALL, V11 Sport ALL, Daytona ALL, Centauro, V9 ALL, V85TT

Dimensions:
38mm x 50 mm x 7mm

Rotational oil seal for crownwheel carrier in drive box on post 1974 big twins. Front crank oil seal on loop frame models

Also known as Guzzi ref. 90403850 and used on 850 GT and loop frame models for front crank oil seal ( 90403851 )

part in stock More than 5 in stock

90413850 GU90413850 90 41 38 50
9041 3850 9041.3850 90.41.38.50

£9.80

INC VAT

£8.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 17 of 24

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24