Page 5 of 32
Screen Standard Tinted FAA60007 Fits Le Mans 1, Dimensions: 310mm tall x 325mm wide Standard grey tinted screen for headlamp fairing. Includes screen edge trim. Fitting kits available separately. Screen fasteners are FAA98417 x 3, FAA04001 x 6, FAA90035 x 3, FAA92104 x 3 2 in stock 14577250-z 14577250 GU14577250 14 57 72 50 1457 7250 1457.7250 14.57.72.50 £54.00 INC VAT £45.00 EX VAT
Long Indicator Stem FRA29991 Fits 1000S, Cali 3 IE, Mille GT, Nevada 750 (1991-1993), 750 Targa Dimensions: 65mm stem Rubber indicator stem with triangular foot for indicators LIA29662 and LIA29663 Attaches to bike via 1 x M10 stud 4 in stock £22.00 INC VAT £18.33 EX VAT
Clutch Lever Black CLA14605 Fits Le Mans 1, Le Mans 2, Le Mans 3, T3, T4, 1000 SP, G5, Convert, V35 I, V35 II, V35C, Imola, V50 I, V50 II, V50 3, Monza, V50C, V65 Dimensions: 5.8mm internal diameter mounting hole Black clutch lever See CLA17605 for this lever in aluminium finish. Can also be inverted for use as a brake lever on V50 II and V35 I with cable operated brake 1 in stock 14605750-z 14605750 GU14605750 14 60 57 50 1460 5750 1460.5750 14.60.57.50 £22.00 INC VAT £18.33 EX VAT
Clutch Friction Plate New Type CLA05430 Fits 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, Spada 3, Strada 1000, V11 Sport, Le Mans 1000 (from engine VV016375), Mille GT (from engine VT024596), Cali 3 (from engine VT032542),, Daytona, Centauro, Cali Vintage, Bellagio, Daytona, Centauro, Breva 850, Breva 1100, Griso 850, Griso 1100, Norge (2v/cyl), 1200 Sport (2v/cyl), Jackal New type clutch friction plate for models with deep splines with deep splined centre 2 plates required- thicker side of each friction plate should face transmission. Also known as Guzzi ref. 30084410, 03084400, 29084450
V11 Tenni, Rosso Mandello and Scura have a single plate clutch which uses a different friction plate (unfortunately out of production)
These can be fitted to earlier 850 and 1000 models if the early shallow splined clutch centre is replaced with the later deep splined type. See our kit CLA20302 to update early 850/1000 models. Clutch plate alignment tool also available, see TOA30510
4 in stock 05084430 GU05084430 05 08 44 30 0508 4430 0508.4430 05.08.44.30 £57.70 INC VAT £48.08 EX VAT
Performance Air Filter K & N SIA10434 Fits V7 Special (2012-2015), V7 Stone (2012-2015), Nevada 750 (2012-2013), V7 Racer (2012-2015), V9 ALL, V7 II ALL, V7 III ALL, V7 850 ALL Dimensions: 180mm x 125mm x 38mm K&N high performance air filter, flat paper cartridge type for single throttle body models - High Air Flow with Excellent Filtration
- Designed to Increase Horsepower and Acceleration
- Washable and Reusable
- Will NOT Void Vehicle Warranty
- Lasts up to 50,000 miles before cleaning is required depending on driving conditions
- K&N Million Mile Limited Warranty�
- Emissions Legal
- Economical, a K&N Air Filter Will Last the Life of Your Bike
- Works with Original Equipment Manufacturer Vehicle Electronics
- Easy High Performance Add-on
- Environmentally Friendly
1 in stock AP8104924 £70.00 INC VAT £58.33 EX VAT
Timing Chain Duplex ENA28060 Fits 1100 Sport ALL, 850/1000 ALL Models, MGS-01, Quota 1100, Cali 1100 (1994-1997), Cali EV, V11 Sport ALL Uprated double row cam chain, ideally fit with sprung chain tensioner ENA20071 1 in stock 28058060 GU28058060 28 05 80 60 2805 8060 2805.8060 28.05.80.60 £54.00 INC VAT £45.00 EX VAT
Spring Side Stand and Centre Stand FRA12001 Fits Nuovo Falcone, Nevada 750 (1998-2003), V35 ALL, V50 ALL, V65 ALL, 750T, 750X, 750 Targa, Strada 750, 750 SP, 850/1000 ALL Models, 850 GT, V7 700, V7 Special (1969-1971), V7 Sport, S3, 750S, Cali 1100, Cali EV, Cali Jackal, Cali Stone
Dimensions: 97mm overall length Heavy duty spring used for centrestand and sidestand applications More than 5 in stock 12434001-z 12434001 GU12434001 12 43 40 01 1243 4001 1243.4001 12.43.40.01 £9.00 INC VAT £7.50 EX VAT
Clutch Intermediate Plate CLA12300 Fits 750S, S3, V7 Sport, V7 Special (1969-1971), V7 700, 850 GT, 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, V11 Sport ALL, Cali Vintage, Bellagio, Daytona, Centauro, Breva 850, Breva 1100, Breva 1200 (2v/cyl), Griso 850, Griso 1100, Norge 1200 (2v/cyl) Steel intermediate clutch plate 2 in stock 12082300-z 12082300 GU12082300 12 08 23 00 1208 2300 1208.2300 12.08.23.00 £28.00 INC VAT £23.33 EX VAT
Breather Hose Large ENA18450 Fits Le Mans 3, Le Mans 1000, 1000S, SP II, Spada 3, Cali 1100 (1994-1997), Cali EV (1997-2002), Cali Stone, Cali Jackal, T5, Cali 2, Cali 3, Mille GT, Strada 1000, T5 Polizia Dimensions: 19mm ID, 23mm OD Large frame to engine crankcase breather pipe 3 in stock 28157450-z 28157450 GU28157450 28 15 74 50 2815 7450 2815.7450 28.15.74.50 £13.50 INC VAT £11.25 EX VAT
Oil Return Pipe Sump ENA27360 Fits V35 ALL, V50 ALL, V65 ALL, V75, Nevada ALL (1991-2003), Strada 750, 750 Targa, Breva 750, Nevada 750 (2004-), V7 Cafe, V7 Classic, V7 Stone, V7 Racer Dimensions: 7mm ID x 12mm OD x 990mm Oil return pipe with threaded union for sump Can be used in place of GU32159310 on late V7 models if pipe is cut and breather valve from old pipe inserted into cut section. Uses crush washer SIA12200 4 in stock 27159360-z 27159360 GU27159360 27 15 93 60 2715 9360 2715.9360 27.15.93.60 £13.20 INC VAT £11.00 EX VAT
Page 5 of 32
|