8 sided oil filter tool for new UFI filters
This tool is for models where the sump needs to be removed to get to the oil filter. This fits SIA14530 and the later metal finish filter SIA15300 which was updated to 8 sides in late 2018. Not suitable for Mahle oil filters
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
High quality German made Mahle OE quality cartridge oil filter with sealing rubber.
From late 2015 onwards 1200 models used SIA06428
Please note that Daytona 1000 models where filter screws into base of sump require SIA14530. This is a 14 sided oil filer which is compatible with our oil filter tools TOA41005 and TOA01200. This Mahle filter is shorter that the equivalent UFI filter. See ENA90948 for the oil filter cover o ring
More than 5 in stock
30153000 GU30153000 30 15 30 00
3015 3000 3015.3000 30.15.30.00
£9.25
INC VAT
£7.71 EX VAT
UFI 25 46 500 cartridge oil filter. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick
For post 1989 V35, V50 and V65 models use SIA27300 .
NB Packaging may vary. For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer)
More than 5 in stock
19153000 GU19153000 19 15 30 00
1915 3000 1915.3000 19.15.30.00
£8.50
INC VAT
£7.08 EX VAT
£12.50
INC VAT
£10.42 EX VAT
Head gasket
Can be used in place of ENA19062 and Guzzi ref. B063099 but it is recommended to use a gasket sealant for this application
More than 5 in stock
27022060-z 27022060 GU27022060 27 02 20 60
2702 2060 2702.2060 27.02.20.60
£11.20
INC VAT
£9.33 EX VAT
Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers
Supplied with 4 crush washers. Also known as Guzzi ref. 95990033
More than 5 in stock
95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28
Also fits Laverda Jota
£8.40
INC VAT
£7.00 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT
5 pin 12 volt relay suitable for starter, lights, indicator, flasher and horn applications
Supercedes Guzzi ref. 12732500. Equivalent to 28732500 but with mounting bracket
4 in stock
19732500-z 19732500 GU19732500 19 73 25 00
1973 2500 1973.2500 19.73.25.00
£15.20
INC VAT
£12.67 EX VAT
Round 12v two pin flasher relay
See FRA17720 for rubber mount
More than 5 in stock
17750520 GU17750520 17 75 05 20
1775 0520 1775.0520 17.75.05.20
£7.60
INC VAT
£6.33 EX VAT
1 litre of Millers 80w-90 mineral based transmission oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals
An extreme pressure differential oil SAE 80w90 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.
Provides performance level specified by manufacturers for gearboxes and final drives.
Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. API GL-5
Quantities required:
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT