The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

New Spares Recently Back In Stock

Sort by Title

Sort by Price

Page 10 of 19

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19

Bevel Box Output Seal

TRA90085 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV (1997-2002), 1100 Sport ALL, Daytona ALL, Centauro, V11 Sport (1999-2001), V7 Sport, V7 700, V7 Special (1969-1971), 850GT

Dimensions:
70mm x 85mm x 8mm

Output oil seal for drive box

This oil seal fits output side of bevel box

part in stock More than 5 in stock

90407085-z 90407085 GU90407085 90 40 70 85
9040 7085 9040.7085 90.40.70.85

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Fork Seal

SUA30861 Fits Cali 1100 (1994-1997), T5 Police (1995-2001)

Dimensions:
40mm ID x 52mm OD

Fork seal

part in stock 3 in stock

30532861 GU30532861 30 53 28 61
3053 2861 3053.2861 30.53.28.61

£8.90

INC VAT

£7.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Ignition Points Pair

SIA14715 Fits V7 Sport, 750S, S3, 850T, G5, Convert, 1000 SP, T3, T4, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T5, Cali 2, Cali 3

Pair of ignition points (made up of Guzzi part numbers 14715429 and 14715430)

part in stock More than 5 in stock

14719800 GU14719800 14 71 98 00
1471 9800 1471.9800 14.71.98.00

£29.50

INC VAT

£24.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Pressure Switch

ELA19670 Fits 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Centauro, Daytona, Quota 1100, V11 Sport ALL, V35 ALL, V50 ALL, V7 Sport, S3, 750S, V7 700, 850 GT, Nuovo Falcone

Dimensions:
M12 thread, 46mm x 21mm bolt flats

Oil pressure sender, M12 thread, male bullet connector

Supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.

See ENA12640 for replacement crush washer if required

part in stock More than 5 in stock

17768750 GU17768750 17 76 87 50
1776 8750 1776.8750 17.76.87.50

£10.00

INC VAT

£8.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Crank Oil Seal Rear

ENA90367 Fits V7 Sport, 750 S3, 750S, V7 700, V7 Special (1969-1971), 850 GT, 850/1000 All Models, 1100 Sport ALL, 1200 Sport, Centauro, Daytona, Quota ALL, Cali 1100 (1994-1997), Cali EV, V35 ALL, V50 ALL, V65 ALL, V75 ALL, Strada 750, 750 Targa, 750 SP, Nevada 350 (1991-1998), Nevada 750 (1991-1998), V11 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Stelvio, Norge, Griso, Cali 1400 ALL

Dimensions:
68mm OD

Rear crankcase oil seal or rear main oil seal.

Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch

part in stock More than 5 in stock

90405367-z 90405367 GU90405367 90 40 53 67
9040 5367 9040.5367 90.40.53.67

£14.00

INC VAT

£11.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Seal

TRA90850 Fits V7 Sport, V7 700, V7 Special (1969-1971), 850 GT, Cali Vintage, Cali Classic Touring, 850/1000 ALL Models, Cali 1100, Cali EV, 1100 Sport ALL, V11 Sport ALL, Daytona ALL, Centauro, V9 ALL, V85TT

Dimensions:
38mm x 50 mm x 7mm

Rotational oil seal for crownwheel carrier in drive box on post 1974 big twins. Front crank oil seal on loop frame models

Also known as Guzzi ref. 90403850 and used on 850 GT and loop frame models for front crank oil seal ( 90403851 )

part in stock More than 5 in stock

90413850 GU90413850 90 41 38 50
9041 3850 9041.3850 90.41.38.50

£9.80

INC VAT

£8.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Filter UFI 2314900

SIA14530 Fits 125 2C, 250 TS, S3, 850/1000 ALL Models, Daytona 1000

Dimensions:
For 16mm threaded spigot

Cartridge oil filter UFI 23 149 00

Fits Daytona 1000 models where filter screws into base of sump. This is an 8 sided UFI filter.
Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump.

You may also require SIA10070 which is the crush washer for the drain plug and ENA14036 (sump gasket). Please note that Daytona RS and T5 Polizia use filter SIA15300

part in stock More than 5 in stock

14153000 GU14153000 14 15 30 00
1415 3000 1415.3000 14.15.30.00

£10.50

INC VAT

£8.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Cable

CAA01002 Fits V7 II Stornello, V7 II Stone (2015-2016), V7 II Special (2015-2016)

Dimensions:
Outer 1130 mm free length 105 mm

Clutch cable

We advise you to measure your existing cable before ordering in case you have a non standard set up

part in stock 1 in stock

2B001202

£23.00

INC VAT

£19.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Fork Seal

SUA30861 Fits Cali 1100 (1994-1997), T5 Police (1995-2001)

Dimensions:
40mm ID x 52mm OD

Fork seal

part in stock 3 in stock

30532861 GU30532861 30 53 28 61
3053 2861 3053.2861 30.53.28.61

£8.90

INC VAT

£7.42 EX VAT this is the price you will pay if you are ordering from outside the UK

O ring

ENA93331 Fits Centauro, Daytona (1992-1996), MGS-01

Black O ring

Belt cover O ring, two required per engine

part in stock 2 in stock

90706331-z 90706331 GU90706331 90 70 63 31
9070 6331 9070.6331 90.70.63.31

£8.28

INC VAT

£6.90 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 10 of 19

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19