Page 4 of 18
Nut Crankshaft Timing Sprocket ENA93026 Fits 850/1000 ALL Models, V11 Sport, MGS-01, Cali 1100 (series 1), Quota 1100, V7 Sport, 850 GT Dimensions: 23.5mm ID Special nut for retaining crankshaft timing sprocket. Also used as clutch centre nut on V11 Sport See TOA18651 for special tool to remove and tighten this nut. Nut also known as Guzzi ref. 93601025. See ENA92525 for correct part for series 2 Cali 1100s 4 in stock 93601026 GU93601026 93 60 10 26 9360 1026 9360.1026 93.60.10.26 £8.00 INC VAT £6.67 EX VAT
Automatic Bleed Valve M10 Bleed Nipple BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL Dimensions: M10 x 1 The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function on this auto bleed valve, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover 5 in stock
£26.50 INC VAT £22.08 EX VAT
Automatic Bleed Valve M6 Bleed Nipple BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL Dimensions: M6 x 16mm The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed. - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover More than 5 in stock
£26.50 INC VAT £22.08 EX VAT
Automatic Bleed Valve M10 Bleed Nipple BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL Dimensions: M10 x 1 The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function on this auto bleed valve, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover 5 in stock
£26.50 INC VAT £22.08 EX VAT
Mini Relay 5 Pin ELA01560 Fits Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, 1100 Sport ALL, Centauro, Daytona, Nevada 750 (1998-2003), Nevada 350, Quota 1100, V11 Sport, Cali 3, Strada 1000, 1200 Sport, Breva 850, Breva 1100, Breva 1200, Griso ALL, Norge ALL, Stelvio Dimensions: 24mm x 15mm x 25mm body 5 pin mini relay Also known as Guzzi ref. 30732560 Can be used in place of 4 pin mini relay ELA01561. We recommend keeping a spare one in your tool kit More than 5 in stock 01731760 GU01731760 01 73 17 60 0173 1760 0173.1760 01.73.17.60 £14.00 INC VAT £11.67 EX VAT
Starter Motor ELA05731 Fits 1200 Sport, Bellagio, Cali 1400 ALL, Griso ALL, Breva 850, Breva 1100, Breva 1200, Norge ALL, Stelvio, V7 Classic, V7 Cafe, V7 Special, V7 Racer, Nevada 750 (2009-2016), V7 II ALL, V7 III ALL, V9 ALL, V85TT Replacement starter motor for 2006 on models. Also known as 97729R This is a less expensive aftermarket replacement for the OE starter.
Not interchangeable with Valeo and Bosch starters from earlier models. Get a £20 discount on this part if you send us your faulty but reconditionable starter motor 1 in stock 05730730 GU05730730 05 73 07 30 0573 0730 0573.0730 05.73.07.30 £150.00 INC VAT £125.00 EX VAT
Mistral Frame Plug Kit ACA39100 Fits V7 ALL, V7 II ALL, V7 III ALL, V7 850 ALL, V9 ALL Kit of 4 black frame caps to tidy up the bolt heads for the pillion and exhaust footpeg hanger Simple installation, lasting looks 1 in stock £15.00 INC VAT £12.50 EX VAT
Ignition Points Pair SIA14715 Fits V7 Sport, 750S, S3, 850T, G5, Convert, 1000 SP, T3, T4, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T5, Cali 2, Cali 3 Pair of ignition points (made up of Guzzi part numbers 14715429 and 14715430) More than 5 in stock 14719800 GU14719800 14 71 98 00 1471 9800 1471.9800 14.71.98.00 £29.50 INC VAT £24.58 EX VAT
Oil Pressure Switch ELA19670 Fits 850/1000 ALL Models, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Cali Stone, Cali Jackal, Cali Vintage, Centauro, Daytona, Quota 1100, V11 Sport ALL, V35 ALL, V50 ALL, V7 Sport, S3, 750S, V7 700, 850 GT, Nuovo Falcone Dimensions: M12 thread, 46mm x 21mm bolt flats Oil pressure sender, M12 thread, male bullet connector Supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.
See ENA12640 for replacement crush washer if required More than 5 in stock 17768750 GU17768750 17 76 87 50 1776 8750 1776.8750 17.76.87.50 £10.00 INC VAT £8.33 EX VAT
Rear Suspension Bearing SUA81066 Fits Bellagio, Breva 850, Breva 1100, Breva 1200, Griso 1100, Griso 1200, MGS-01, Norge ALL, 1200 Sport, Stelvio Needle roller bearing used in lower suspension linkage for rear shock absorber. 7 bearings required per bike See SUA81068 for bearing oil seal More than 5 in stock AP8110066 £6.60 INC VAT £5.50 EX VAT
Page 4 of 18
|