UFI 25 46 500 cartridge oil filter. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick
For post 1989 V35, V50 and V65 models use SIA27300 .
NB Packaging may vary. For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer)
More than 5 in stock
19153000 GU19153000 19 15 30 00
1915 3000 1915.3000 19.15.30.00
£8.50
INC VAT
£7.08 EX VAT
Oil pressure switch. May be supplied with a vertical spade connector, this supercedes the original Guzzi part which is no longer available. This version will fit without removal of the alternator
See ENA12640 for replacement crush washer and ELA10005 for female spade connector
2 in stock
31768780 GU31768780 31 76 87 80
3176 8780 3176.8780 31.76.87.80
£11.00
INC VAT
£9.17 EX VAT
Stainless steel silencer clamp
Can also be used in place of Guzzi ref. GU06126900
More than 5 in stock
976521 MG976521
£8.80
INC VAT
£7.33 EX VAT
Heavy duty spring used for centrestand and sidestand applications
More than 5 in stock
12434001-z 12434001 GU12434001 12 43 40 01
1243 4001 1243.4001 12.43.40.01
£9.00
INC VAT
£7.50 EX VAT
Single 100cm length of neoprene rubber pipe used for oil breather applications depending on model. Can be used as fuel pipe on carb bikes. Also see FUA00011 as alternative for this pipe
Use hose clip FUA00004
3 in stock
£7.00
INC VAT
£5.83 EX VAT
Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.
For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers
More than 5 in stock
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£19.30
INC VAT
£16.08 EX VAT
Pair of EBC FA018 brake pads for P2 F08 (P8) calipers.
For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers
More than 5 in stock
28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01
Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£19.30
INC VAT
£16.08 EX VAT
Final drive inner seal
For Breva 750 up to frame no. LL111907
More than 5 in stock
90407590-z 90407590 GU90407590 90 40 75 90
9040 7590 9040.7590 90.40.75.90
£9.00
INC VAT
£7.50 EX VAT
Clutch cable
We advise you to measure your existing cable before ordering in case you have a non standard set up.
3 in stock
14093051-z 14093051 GU14093051 14 09 30 51
1409 3051 1409.3051 14.09.30.51
£20.00
INC VAT
£16.67 EX VAT
500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.
See BRA99013 for high performance alternative.
If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£7.92
INC VAT
£6.60 EX VAT