Front wheel bearing, sealed

2 bearings required per wheel, Also used as rear wheel bearing on V7 850

 More than 5 in stock

 92204221 GU92204221 92 20 42 21
 9220 4221 9220.4221 92.20.42.21

Pair of EBC FA047 brake pads for Brembo F05 (P5) calipers and Grimeca front calipers

 More than 5 in stock

27654610-z 27654610 GU27654610 27 65 46 10
 2765 4610 2765.4610 27.65.46.10

Also fits Benelli 250 TS, Ducati Pantah 500SL, Magni Sfida

Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes

Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549

 More than 5 in stock

 90403548 GU90403548 90 40 35 48
 9040 3548 9040.3548 90.40.35.48

Rear crankcase oil seal or rear main oil seal.

Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch

 More than 5 in stock

90405367-z 90405367 GU90405367 90 40 53 67
 9040 5367 9040.5367 90.40.53.67

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   More than 5 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

 More than 5 in stock

A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787

See BRA36794 for rubber cap

 More than 5 in stock

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

High pressure black fuel line / fuel line, can be used to replace fuel line on other models with 6mm ID fuel lines

This high pressure fuel hose is rated to 225 PSI. It has been designed for use with Modern Chemically Aggressive Bio-Ethanol Enriched Petrol Formulations (E5 & E10) As per currently served petrol pump petrol. Confirms to SAE J30 R7 and BS AU 108. See FUA00004 for hose clips and FUA80011 for a T piece to fit this pipe

 More than 5 in stock

AP8144069

1 litre of fully synthetic ENI i-Ride 4T Racing SAE 10W-60 engine oil. Moto Guzzi specify this oil for 2004 on small twins, 2006 on Cali EV models and all Breva, Norge, Stelvio, 1200 Sport and Griso models. This is latest generation synthetic oil which gives best protection for your engine, even at extreme temperatures. The special 10w60 formulation ensures great thermal and shear stability

ENI rated API SL. Suitable for sport and racing use.

Quantities required:
• 1200 Sport, Breva 1100, 1200, Griso, Norge, Stelvio, Cali EV - engine: 3.6l
• Cali 1400 - engine 4.01l
• Bellagio - engine: 3l
• Breva 750, Nevada 750 (2004 on), V7 Classic - engine: 2l

 More than 5 in stock

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock