Set of ignition points (made up of two boxes of contacts)
More than 5 in stock
19709620 GU19709620 19 70 96 20
1970 9620 1970.9620 19.70.96.20
£32.60
INC VAT
£27.17 EX VAT
Pinion oil seal for rear drive box on small twins and rear wheel bearing oil seal for 850T
More than 5 in stock
90403247 GU90403247 90 40 32 47
9040 3247 9040.3247 90.40.32.47
£10.50
INC VAT
£8.75 EX VAT
Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
See BRA10310 for less expensive replica kit
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£29.00
INC VAT
£24.17 EX VAT
Black rubber battery mat
This is the larger battery tray fitted to Tonti framed models
3 in stock
14707000 GU14707000 14 70 70 00
1470 7000 1470.7000 14.70.70.00
£12.20
INC VAT
£10.17 EX VAT
Dust cover for fork leg, seals against stanchion to protect fork seal
More than 5 in stock
14524500-z 14524500 GU14524500 14 52 45 00
1452 4500 1452.4500 14.52.45.00
£11.50
INC VAT
£9.58 EX VAT
Inlet rubber with HT lead guide
Fits between exhaust manifold on cylinder head and carb. Use hose clip SSA45970. Suitable for PHF30 and PHF36 carbs
More than 5 in stock
14114350-z 14114350 GU14114350 14 11 43 50
1411 4350 1411.4350 14.11.43.50
£13.00
INC VAT
£10.83 EX VAT
Black rubber battery mat
This is the larger battery tray fitted to Tonti framed models
3 in stock
14707000 GU14707000 14 70 70 00
1470 7000 1470.7000 14.70.70.00
£12.20
INC VAT
£10.17 EX VAT
Manually operated fuel tap or fuel valve. Operated by turning base of tap. Supplied with nut and sealing washer
Can be used to replace electronic fuel solenoid valve 03105300 and manual fuel tap 29105460
More than 5 in stock
01105460 GU01105460 01 10 54 60
0110 5460 0110.5460 01.10.54.60
£33.00
INC VAT
£27.50 EX VAT
Set of ignition points (made up of two boxes of contacts)
More than 5 in stock
19709620 GU19709620 19 70 96 20
1970 9620 1970.9620 19.70.96.20
£32.60
INC VAT
£27.17 EX VAT
Dust cover for fork leg, seals against stanchion to protect fork seal
More than 5 in stock
14524500-z 14524500 GU14524500 14 52 45 00
1452 4500 1452.4500 14.52.45.00
£11.50
INC VAT
£9.58 EX VAT