Shop headings: New Spares | Used Spares | Accessories | Brands
10 Results -
Oil pressure switch. May be supplied with a vertical spade connector, this supercedes the original Guzzi part which is no longer available. This version will fit without removal of the alternator
See ENA12640 for replacement crush washer and ELA10005 for female spade connector
5 in stock
31768780 GU31768780 31 76 87 80
3176 8780 3176.8780 31.76.87.80
£11.00
INC VAT
£9.17 EX VAT
Oil pressure switch
Does not fit models with 2 valves per cylinder. See ENA12640 for replacement crush washer if required
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
We need to check whether we have stock of this part, check availability
978854 MG978854
£2.70
INC VAT
£2.25 EX VAT
Oil pressure switch
Does not fit models with 2 valves per cylinder. See ENA12640 for replacement crush washer if required.
Discontinued by Guzzi in 2014, superceded by ELA32710, note ELA32710 has a single male spade connector so it will be necessary to modify wiring to connect this switch
Sorry, this part is no longer available.
978854 MG978854
Sorry this item is out of production
Threaded adapter base for oil pressure switches
See ENA12640 for crush washer
This part is due back in stock soon, call 01484 841395 to reserve yours
887123 MG887123
£19.00
INC VAT
£15.83 EX VAT
Oil pressure switch M12 thread, male spade connector
Superceded by ELA19670 . See ENA12640 for replacement crush washer if required
Sorry, this part is no longer available.
12768700 GU12768700 12 76 87 00
1276 8700 1276.8700 12.76.87.00
Sorry this item is out of production
Oil pressure sender
Can also be used in place of oil pressure switch 17768750 and adapter 19055800 on Monza (check which type your small twin uses before replacing). Replaces two part sensor 31999581.
See ENA12640 for replacement crush washer if required
2 in stock
19768720-z 19768720 GU19768720 19 76 87 20
1976 8720 1976.8720 19.76.87.20
£15.50
INC VAT
£12.92 EX VAT
Oil pressure sender, M12 thread, male bullet connector
Supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.
See ENA12640 for replacement crush washer if required
More than 5 in stock
17768750 GU17768750 17 76 87 50
1776 8750 1776.8750 17.76.87.50
£10.00
INC VAT
£8.33 EX VAT
Aluminium crush washer, various applications eg. oil and breather lines, drive box breather and drain on V11 Sport
Can be used instead of SIA90120 (Breva, Griso etc... bevel box fill plug)
More than 5 in stock
12006400 GU12006400 12 00 64 00
1200 6400 1200.6400 12.00.64.00
£0.80
INC VAT
£0.67 EX VAT
Dimensions:
M12 thread x 73mm
Hollow screw for crankcase breather return ENG12620
Uses 2 x ENA12640 washer
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
9 in stock, request a quote
12006600 GU12006600 12 00 66 00
1200 6600 1200.6600 12.00.66.00
£5.00
INC VAT
£4.17 EX VAT
High quality German made Mahle fuel filter, threaded connections
Replace every 6000 miles. Replaces Guzzi refs. 29106060 and 29999660. Only for series 1 Daytona 1000. Will not fit early Cali 3s which have filters with two 14mm threads. Does not include crush washers SIA18161 and ENA12640 (one of each required)
4 in stock
29106061 GU29106061 29 10 60 61
2910 6061 2910.6061 29.10.60.61
£19.50
INC VAT
£16.25 EX VAT