Fork seal for Marzocchi M1R forks
3 in stock
30530502-z 30530502 GU30530502 30 53 05 02
3053 0502 3053.0502 30.53.05.02
Also fits Laverda SFC1000
£10.50
INC VAT
£8.75 EX VAT
Exhaust gasket, silencer bush or muffler gasket shim for exhaust joint between silencer and downpipe
2 exhaust bushes required per bike
More than 5 in stock
91113826 GU91113826 91 11 38 26
9111 3826 9111.3826 91.11.38.26
£15.00
INC VAT
£12.50 EX VAT
Fork seal
5 in stock
30532861 GU30532861 30 53 28 61
3053 2861 3053.2861 30.53.28.61
£8.90
INC VAT
£7.42 EX VAT
Pinion oil seal for rear drive box on small twins and rear wheel bearing oil seal for 850T
More than 5 in stock
90403247 GU90403247 90 40 32 47
9040 3247 9040.3247 90.40.32.47
£10.50
INC VAT
£8.75 EX VAT
Black rubber battery mat
This is the larger battery tray fitted to Tonti framed models
3 in stock
14707000 GU14707000 14 70 70 00
1470 7000 1470.7000 14.70.70.00
£12.20
INC VAT
£10.17 EX VAT
Pair of ignition points (made up of Guzzi part numbers 14715429 and 14715430)
More than 5 in stock
14719800 GU14719800 14 71 98 00
1471 9800 1471.9800 14.71.98.00
£29.50
INC VAT
£24.58 EX VAT
Dellorto needle valve kit comprising of valve and felt washer. For PHF36 and PHM40 carbs
Also known as Guzzi ref. 076527649, 14939150 and Ducati ref. 076527645, 0765.27.645
3 in stock
14939150 GU14939150 14 93 91 50
1493 9150 1493.9150 14.93.91.50
Also fits Ducati 750/900 SS Koewe, Ducati 750 F1/Laguna Seca, Ducati 900 MHR, S2, Ducati 900 MHR-I, Ducati 1000 MHR-2,S2
£24.00
INC VAT
£20.00 EX VAT
Clutch friction plate
Also known as Guzzi ref. 27084460
2 in stock
32084410-z 32084410 GU32084410 32 08 44 10
3208 4410 3208.4410 32.08.44.10
£130.00
INC VAT
£108.33 EX VAT
Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
See BRA10310 for less expensive replica kit
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£29.00
INC VAT
£24.17 EX VAT
Oil pressure sender, M12 thread, male bullet connector
Supercedes Guzzi no. 12768700. Some small twins also require adapter 19055800 (or ELA19720 can be fitted in place of this switch). Check which type your small twin uses before replacing.
See ENA12640 for replacement crush washer if required
More than 5 in stock
17768750 GU17768750 17 76 87 50
1776 8750 1776.8750 17.76.87.50
£10.00
INC VAT
£8.33 EX VAT