The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop

New Spares Recently Back In Stock

Sort by Title

Sort by Price

Page 3 of 20

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Nut Crankshaft Timing Sprocket

ENA93026 Fits 850/1000 ALL Models, V11 Sport, MGS-01, Cali 1100 (series 1), Quota 1100, V7 Sport, 850 GT

Dimensions:
23.5mm ID

Special nut for retaining crankshaft timing sprocket. Also used as clutch centre nut on V11 Sport

See TOA18651 for special tool to remove and tighten this nut. Nut also known as Guzzi ref. 93601025. See ENA92525 for correct part for series 2 Cali 1100s

part in stock 4 in stock

93601026 GU93601026 93 60 10 26
9360 1026 9360.1026 93.60.10.26

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M10 Bleed Nipple

BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
M10 x 1

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function on this auto bleed valve, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover
More than 5 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M10 Single Banjo Bolt

BRA41653 Universal Part

Dimensions:
M10 bolt with M6 bleed nipple

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover
3 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£33.00

INC VAT

£27.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M6 Bleed Nipple

BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
M6 x 16mm

The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper

Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover
More than 5 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M10 Bleed Nipple

BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
M10 x 1

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function on this auto bleed valve, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÃœV Rheinland.
See BRA41652 for bleed valve cover
More than 5 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Inlet Manifold Rubber

FUA14114 Fits Cali 3, Cali 1100 (carb), Le Mans 1, Le Mans 2, Le Mans 3, Mille GT, Spada 3, T5, Strada 1000, 1000S (PHF36 carb)

Dimensions:
42mm internal diameter x 38mm long

Inlet rubber with HT lead guide

Fits between exhaust manifold on cylinder head and carb. Use hose clip SSA45970. Suitable for PHF30 and PHF36 carbs

part in stock More than 5 in stock

14114350-z 14114350 GU14114350 14 11 43 50
1411 4350 1411.4350 14.11.43.50

£13.00

INC VAT

£10.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Side Stand Complete

FRA17432 Fits Le Mans 1, Le Mans 2, CX100, Le Mans 3, T3, S3, T4, 1000 SP, T5, V7 Sport

Dimensions:
250mm from pivot to base of stand

Complete cast side stand with springs, pivot and mounting bracket finished in black. This stand is the original flip up / self retracting type

Bolts to engine mounting bolt at front of lower framerail, check that you have a long enough front engine mounting bolt for this sidestand to fit on to. This can be fitted to other Tonti frame models (e.g. Le Mans 1000). See FRA28162 for bracket that enables this stand to be mounted near the rider's footrest using the gearbox mounting bolt.

part in stock 1 in stock

17432060-z 17432060 GU17432060 17 43 20 60
1743 2060 1743.2060 17.43.20.60

£99.00

INC VAT

£82.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Throttle cable

CAA14117 Fits Le Mans 2, CX100

Dimensions:
897mm outer length, 105mm free length, 5.7mm barrel nipple, 5.7mm barrel nipple

Throttle cable for models with standard high top PHF pumper carbs

We advise you to measure your existing cable before ordering in case you have a non standard set up.

part in stock 4 in stock

14117555 GU14117555 14 11 75 55
1411 7555 1411.7555 14.11.75.55

£13.50

INC VAT

£11.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Gasket Kit Top End

ENA00012 Fits 850T, T3, T4, Le Mans 1, Le Mans 2

Dimensions:
83mm round barrel

Top end gasket and seal set containing rocker cover, base and head gaskets plus top end O rings

Top end gasket set for one cylinder. Inlet manifold gasket ENA14550 or ENA14500 and exhaust gasket ENA90718 available separately

part in stock More than 5 in stock

£14.40

INC VAT

£12.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Rear Hugger Matte Black

ACA85079 Fits V85TT

Rear hugger finished in matte black, this will protect your rear shock from road spray and grit. Mounts via three pre drilled holes and supplied brackets

Similar matte finish to front mudguard MUA00244 .
Supplied with brackets and fasteners. See here for fitting instructions. Fitment of this hugger requires some mechanical skill- if in doubt please entrust this job to a professional

part in stock 1 in stock

£155.00

INC VAT

£129.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 3 of 20

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20