Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
M8 with 10mm OD shoulder
Socket cap brake disc bolt with shoulder for rear brake disc
6 bolts required per disc. Also used as front disc bolt on T5 Polizia (1995-2001) and for EBC discs with 10mm bolt holes. Zinc finish
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
9 in stock
30611460 GU30611460 30 61 14 60
3061 1460 3061.1460 30.61.14.60
£1.20
INC VAT
£1.00 EX VAT
Brush kit for overhauling Bosch starter motor
The brush connections need to be soldered
1 in stock
£11.00
INC VAT
£9.17 EX VAT
Brake bleed screw for Brembo single bleed P2 F08 (P8) calipers.
This part is available by special order, request a quote
£3.90
INC VAT
£3.25 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats
Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.
Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap
More than 5 in stock
£7.80
INC VAT
£6.50 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
More than 5 in stock
£8.20
INC VAT
£6.83 EX VAT
Brembo rubber bleed nipple cap without retaining ring
More than 5 in stock
£1.00
INC VAT
£0.83 EX VAT
Brembo P08 / F08 ( P8 ) left hand (if mounted behind fork leg) or rear (mounted above and behind wheel spindle) single bleed (M10 bleed nipple) brake caliper
Coated aluminium pistons
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
28653001 GU28653001 28 65 30 01
2865 3001 2865.3001 28.65.30.01
Prices from
£60.00 - £125.00
inc VAT dependent on condition
Brembo caliper cover for models with P2 F08 (P8) single bleed nipple calipers
You may need to immerse the cover in warm water before fitting
2 in stock
17654760 GU17654760 17 65 47 60
1765 4760 1765.4760 17.65.47.60
£12.50
INC VAT
£10.42 EX VAT
Brembo caliper cover for models with P2 F08 (P8) single bleed nipple calipers
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
2 in stock
17654760 GU17654760 17 65 47 60
1765 4760 1765.4760 17.65.47.60
£4.00
INC VAT
£3.33 EX VAT
Caliper mounting shim, used to precisely centre caliper over brake disc
This part is due back in stock soon, call 01484 841395 to reserve yours
95100332 GU95100332 95 10 03 32
9510 0332 9510.0332 95.10.03.32
£1.20
INC VAT
£1.00 EX VAT