Shop headings: New Spares | Used Spares | Accessories | Brands
218 Results - Page 18 of 22
Pair of Italian made stainless steel downpipes in a satin finish
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA03900
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
14120906+14120901
£215.00
INC VAT
£179.17 EX VAT
Pair of Italian made stainless steel downpipes in a polished finish.
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA16028
Exhaust collets not required
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
14120906+14120901
£215.00
INC VAT
£179.17 EX VAT
Pair of Italian made stainless steel downpipes in a polished finish
Hand made to order in Italy
These are for use with a crossover or H piece e.g. EXA03900
Exhaust collets not required.
NB does not include exhaust clamps. For clamps see EXA36900
This part is available by special order, request a quote
£215.00
INC VAT
£179.17 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is available by special order, request a quote
£150.00
INC VAT
£125.00 EX VAT
High performance aluminium velocity stack for airbox to throttle body union on single throttle body models. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is due back in stock soon, call 01484 841395 to reserve yours
£140.00
INC VAT
£116.67 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4, 5 and 5+ models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA85433 and V-Twin Boost - ACA85001 or ACA85002.
Customer Kev fitted this combo and called us the next day to say that his V85TT was transformed; the fluffy throttle response between 2k and 3k was gone and the engine pulled better. Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is due back in stock soon, call 01484 841395 to reserve yours
£140.00
INC VAT
£116.67 EX VAT
High quality standard balance pipe or crossover for standard Le Mans exhaust systems (not required on models with long silencers EXA14998 fitted). Finished in black and made in Mandello this H piece has been developed specifically for the Le Mans 1 and 2 is an excellent choice for bikes that will be ridden
Note that this is not compatible with the aftermarket Mistral Le Mans downpipes as the centres on this H pipe are too narrow to fit them. This H piece is for standard Le Mans exhaust systems
This part is available by special order, request a quote
£135.00
INC VAT
£112.50 EX VAT
High quality balance pipe or crossover for Mistral Le Mans exhaust systems (not required on models with long silencers EXA14998 fitted). Finished in black and made in Mandello this H piece has been developed specifically for the Le Mans 1 and 2 is an excellent choice for bikes that will be ridden
Note that this is not compatible with the original Le Mans downpipes with crosspipe as the centres on this H pipe are too wide to fit them. We can supply a different version - EXA50019 - which will fit by special order
This part is available by special order, request a quote
£125.00
INC VAT
£104.17 EX VAT
Black stainless steel H pipe / collector / balance pipe. Replaces bulky collector box and reduces weight whilst improving access for oil changes
NB this crossover does not include exhaust clamps. Made to order in Italy by performance experts Mistral
This part is available by special order, request a quote
03123900 GU03123900 03 12 39 00
0312 3900 0312.3900 03.12.39.00
£125.00
INC VAT
£104.17 EX VAT
Polished stainless steel H pipe / collector / balance pipe. Replaces bulky collector box and reduces weight whilst improving access for oil changes
NB this crossover does not include exhaust clamps. Also available in a satin finish. Made to order in Italy by performance experts Mistral
This part is available by special order, request a quote
03123900 GU03123900 03 12 39 00
0312 3900 0312.3900 03.12.39.00
£125.00
INC VAT
£104.17 EX VAT