High quality rear shock without remote hydraulic pre-load adjuster, 38mm gold zinc plated steel damper unit fully re-buildable, 18mm piston rod, wide ranging single circuit progressive damping adjustment with automatic compression / rebound balance. Red powder coated spring, hydraulic spring pre-load adjuster giving 1cm of adjustment. Supplied complete with end mounting bushes / bearings, tools and instructions for spring and damping adjustments. 2-year guarantee.

 This part is available by special order, request a quote

 06550200 GU06550200 06 55 02 00
 0655 0200 0655.0200 06.55.02.00

Gearbox output shaft oil seal

 1 in stock

 90401424 GU90401424 90 40 14 24
 9040 1424 9040.1424 90.40.14.24

Gearbox output shaft oil seal

Superceded by GEA90435

 Sorry, this part is no longer available.

90403547-z 90403547 GU90403547 90 40 35 47
 9040 3547 9040.3547 90.40.35.47

Washer, sits under fork seal

Also known as Guzzi ref. 03530527

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget non-adjustable fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your V100. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

The suspension on the V9 models is notoriously cheap, these shocks are an excellent suspension upgrade which will transform your V9. Fully adjustable damping and preload allows you to get your bike handling as it should.

Combine a pair of Hagon Nitro R rear shocks to transform the handling of your V9.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget non-adjustable fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your Cali. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. Complete replacement fork cartridge kit, replaces all original fork internals

• 20mm AL7075 cartridge with anti friction lapping
• 12mm AL7075 pumping rod with anti friction lapping
• Aluminium billet compression and rebound valves with oilless slide bearings and dedicated shim stacks
• Preload adjuster with 15 specific adjustment clicks
• Compression adjuster with 38 specific clicks
• Rebound Adjuster with 38 specific clicks
• Linear springs available in different rates to tailor set up
• Anti cavitation valve sets
• No modification required to fork leg
• Supplied with high quality fork oil

  Adjustments:

  • Spring preload unit, with specific reference marks
  • Rebound unit with specific clicks
  • Compression unit with specific clicks

   This part is available by special order, request a quote

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]