Page 8 of 20
Hagon Monoshock Upgrade SUA67030 Fits Griso ALL High quality rear shock without remote hydraulic pre-load adjuster, 38mm gold zinc plated steel damper unit fully re-buildable, 18mm piston rod, wide ranging single circuit progressive damping adjustment with automatic compression / rebound balance. Red powder coated spring, hydraulic spring pre-load adjuster giving 1cm of adjustment. Supplied complete with end mounting bushes / bearings, tools and instructions for spring and damping adjustments. 2-year guarantee. This part is available by special order, request a quote 06550200 GU06550200 06 55 02 00 0655 0200 0655.0200 06.55.02.00 £450.00 INC VAT £375.00 EX VAT Gearbox Output Seal TRA90424 Fits 1200 Sport ALL, Bellagio, Breva 850, Breva 1100, Breva 1200, Griso ALL, Norge ALL Gearbox output shaft oil seal 1 in stock 90401424 GU90401424 90 40 14 24 9040 1424 9040.1424 90.40.14.24 £21.20 INC VAT £17.67 EX VAT
Gearbox Output Seal TRA90547 Fits 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, 1100 Sport ALL, Quota 1100, V35, V50, V65, 850 GT, V7 Sport, Nuovo Falcone, V7 700, V7 Special Dimensions: 47mm OD Gearbox output shaft oil seal Superceded by GEA90435 Sorry, this part is no longer available. 90403547-z 90403547 GU90403547 90 40 35 47 9040 3547 9040.3547 90.40.35.47 Fork Washer SUA81094 Fits Cali EV, 1200 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Cali Jackal, Cali Stone, Cali Vintage, Norge ALL, Quota 1100 Dimensions: 45.68 ID x 57.8mm OD x 3mm Washer, sits under fork seal Also known as Guzzi ref. 03530527 This part is available by special order, request a quote £8.80 INC VAT £7.33 EX VAT Fork Upgrade Fully Adjustable Damper and Spring Kit SUA01010 Fits V100 Mandello Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget non-adjustable fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.
These shocks are an excellent suspension upgrade which will transform your V100. Fully adjustable damping and preload allows you to get your bike handling as it should. - Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
-
- Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
- Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
- Anti-cavitation valve sets.
- All internal and external Aluminium components are supplied with oxidation surface treatment.
- No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
- Supplied with specific oil (Motorex Fork Oil)
Adjustments:
- Spring preload unit, with specific reference marks
- Rebound unit with specific clicks
- Compression unit with specific clicks
This part is available by special order, request a quote £1,095.00 INC VAT £912.50 EX VAT Fork Upgrade Fully Adjustable Damper and Spring Kit SUA36010 Fits V9 Bobber, V9 Roamer Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.
The suspension on the V9 models is notoriously cheap, these shocks are an excellent suspension upgrade which will transform your V9. Fully adjustable damping and preload allows you to get your bike handling as it should.
Combine a pair of Hagon Nitro R rear shocks to transform the handling of your V9.
- Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
-
- Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
- Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
- Anti-cavitation valve sets.
- All internal and external Aluminium components are supplied with oxidation surface treatment.
- No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
- Supplied with specific oil (Motorex Fork Oil)
Adjustments:
- Spring preload unit, with specific reference marks
- Rebound unit with specific clicks
- Compression unit with specific clicks
This part is available by special order, request a quote £765.00 INC VAT £637.50 EX VAT Fork Upgrade Fully Adjustable Damper and Spring Kit SUA15010 Fits Norge 1200 (2v/cyl) Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.
These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should. - Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
-
- Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
- Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
- Anti-cavitation valve sets.
- All internal and external Aluminium components are supplied with oxidation surface treatment.
- No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
- Supplied with specific oil (Motorex Fork Oil)
Adjustments:
- Spring preload unit, with specific reference marks
- Rebound unit with specific clicks
- Compression unit with specific clicks
This part is available by special order, request a quote £765.00 INC VAT £637.50 EX VAT Fork Upgrade Fully Adjustable Damper and Spring Kit SUA15011 Fits Norge 1200 (4 valves per cylinder) Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.
These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should. - Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
-
- Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
- Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
- Anti-cavitation valve sets.
- All internal and external Aluminium components are supplied with oxidation surface treatment.
- No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
- Supplied with specific oil (Motorex Fork Oil)
Adjustments:
- Spring preload unit, with specific reference marks
- Rebound unit with specific clicks
- Compression unit with specific clicks
This part is available by special order, request a quote £765.00 INC VAT £637.50 EX VAT Fork Upgrade Fully Adjustable Damper and Spring Kit SUA20010 Fits Cali Stone, Cali Jackal Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget non-adjustable fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.
These shocks are an excellent suspension upgrade which will transform your Cali. Fully adjustable damping and preload allows you to get your bike handling as it should. - Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
- Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
- Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
- Anti-cavitation valve sets.
- All internal and external Aluminium components are supplied with oxidation surface treatment.
- No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
- Supplied with specific oil (Motorex Fork Oil)
Adjustments:
- Spring preload unit, with specific reference marks
- Rebound unit with specific clicks
- Compression unit with specific clicks
This part is available by special order, request a quote £765.00 INC VAT £637.50 EX VAT Fork Upgrade Fully Adjustable Damper and Spring Kit SUA85010 Fits V85TT Complete replacement Matris damper and spring assembly. Complete replacement fork cartridge kit, replaces all original fork internals
£1,075.00 INC VAT £895.83 EX VAT Page 8 of 20
|