Shop headings: New Spares | Used Spares | Accessories | Brands
1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.
As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely
Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.
This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.
The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.
Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name
More than 5 in stock
GU30530527
£14.00
INC VAT
£11.67 EX VAT
1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.
As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely
Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name
More than 5 in stock
£14.00
INC VAT
£11.67 EX VAT
1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.
. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely
Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.
More than 5 in stock
£14.00
INC VAT
£11.67 EX VAT
1 litre of Millers ATF, used for fork lubrication and as hydraulic fluid for auto drive on Convert
1.7l required for Convert torque converter circuit (oil change due every 18000 miles). 80ml required per side for fork lubrication on big twins equipped with cartridge fork dampers (e.g. Le Mans 2, T3, 1000 SP etc...), 70ml for required per side for fork lubrication on small twins and Cali 1100 equipped with cartridge fork dampers (e.g. V50 II, V35 etc...)
OIA02075 can be used as a substitute for ATF in fork rebuilds.
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£9.50
INC VAT
£7.92 EX VAT
Ball bearing mainly used for small twin steering head races
44 balls required per head race set, we also sell a taper roller conversion FRA19999
More than 5 in stock
92295704-z 92295704 GU92295704 92 29 57 04
9229 5704 9229.5704 92.29.57.04
£0.20
INC VAT
£0.17 EX VAT
Taper needle roller bearing used as steering head bearing
2 sets required per bike. Also used as rear drive box pinion bearing on big twins with rear drum brake
More than 5 in stock
92249225 GU92249225 92 24 92 25
9224 9225 9224.9225 92.24.92.25
£20.50
INC VAT
£17.08 EX VAT
Circlip, various applications including damper rod on V35 and V50
4 in stock
90271012 GU90271012 90 27 10 12
9027 1012 9027.1012 90.27.10.12
£1.20
INC VAT
£1.00 EX VAT
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA14601
Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is available by special order, request a quote
19526460-z 19526460 GU19526460 19 52 64 60
1952 6460 1952.6460 19.52.64.60
£249.00
INC VAT
£207.50 EX VAT
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs
Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is available by special order, request a quote
23526410-z 23526410 GU23526410 23 52 64 10
2352 6410 2352.6410 23.52.64.10
£229.00
INC VAT
£190.83 EX VAT
Pair of FAC air assisted fork dampers. These are a major suspension upgrade for the front end of your bike and work best when combined with progressive fork springs SUA18601
Stainless steel damper rod and alloy top nut, supplied with fork top O ring. Pressurise to between 7 and 29 PSI. See OIA01001 for ATF (used in place of fork oil)
This part is available by special order, request a quote
23526470-z 23526470 GU23526470 23 52 64 70
2352 6470 2352.6470 23.52.64.70
£249.00
INC VAT
£207.50 EX VAT