Shop headings: New Spares | Used Spares | Accessories | Brands
Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models with billet rocker cover protectors fitted as these models need 8 of the bolts to be longer
More than 5 in stock
£11.00
INC VAT
£9.17 EX VAT
M16 stainless steel full nut and thick washer for rear wheel spindle
Also referred to as Guzzi ref. 14634400 and 92602316
More than 5 in stock
92602316-z 92602316 GU92602316 92 60 23 16
9260 2316 9260.2316 92.60.23.16
£10.50
INC VAT
£8.75 EX VAT
Sump bolt kit containing all replacement stainless steel socket cap bolts for models without a sump extension fitted
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)
More than 5 in stock
£10.00
INC VAT
£8.33 EX VAT
Stainless steel drain plug for drive box and gearbox, includes recess for crush washer to locate in. Also used as level plug on big twins and front sump drain on small twins.
Also known as Guzzi ref. 95980212, 95980610. Use crush washer SIA10900 with this bolt
More than 5 in stock
95980214-z 95980214 GU95980214 95 98 02 14
9598 0214 9598.0214 95.98.02.14
£9.90
INC VAT
£8.25 EX VAT
Heavy duty stainless steel exhaust silencer clamp replaces Guzzi ref. 29123450, 03123400
4 in stock
14123400 GU14123400 14 12 34 00
1412 3400 1412.3400 14.12.34.00
£9.10
INC VAT
£7.58 EX VAT
Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.
See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.
More than 5 in stock
£9.00
INC VAT
£7.50 EX VAT
M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer
NB this is a half nut. Can also be used as alternator retaining nut 92603516
More than 5 in stock
92602516-z 92602516 GU92602516 92 60 25 16
9260 2516 9260.2516 92.60.25.16
£8.50
INC VAT
£7.08 EX VAT
Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers
Supplied with 4 crush washers. Also known as Guzzi ref. 95990033
More than 5 in stock
95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28
Also fits Laverda Jota
£8.40
INC VAT
£7.00 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
More than 5 in stock
£8.20
INC VAT
£6.83 EX VAT
Titanium rocker feed and breather M8 banjo bolt
Made specially for Gutsibits in corrosion resistant grade 5 titanium. Use with SIA12200 crush washer
More than 5 in stock
95990037 GU95990037 95 99 00 37
9599 0037 9599.0037 95.99.00.37
£8.00
INC VAT
£6.67 EX VAT