Shop headings: New Spares | Used Spares | Accessories | Brands
M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer
NB this is a half nut. Can also be used as alternator retaining nut 92603516
More than 5 in stock
92602516-z 92602516 GU92602516 92 60 25 16
9260 2516 9260.2516 92.60.25.16
£8.50
INC VAT
£7.08 EX VAT
Stainless steel after market exhaust stud
M6 exhaust stud. See ENA31881 for stud nut. Note that unlike the originals these studs are threaded along their entire length.
More than 5 in stock
96506042 GU96506042 96 50 60 42
9650 6042 9650.6042 96.50.60.42
£3.60
INC VAT
£3.00 EX VAT
Stainless steel drain plug for drive box and gearbox, includes recess for crush washer to locate in. Also used as level plug on big twins and front sump drain on small twins.
Also known as Guzzi ref. 95980212, 95980610. Use crush washer SIA10900 with this bolt
More than 5 in stock
95980214-z 95980214 GU95980214 95 98 02 14
9598 0214 9598.0214 95.98.02.14
£9.90
INC VAT
£8.25 EX VAT
Stainless steel M10 double banjo bolt for aluminium coloured brake manifolds only, used with front yoke mounted splitter on some small twins
Supplied with 3 crush washers
This part is available by special order, request a quote
95990034 GU95990034 95 99 00 34
9599 0034 9599.0034 95.99.00.34
£7.20
INC VAT
£6.00 EX VAT
Handy 70g tube of copper grease anti-seize paste
Use to prevent threaded studs, nuts and bolts form seizing
Please note this part CANNOT be posted outside of the UK mainland area
1 in stock
£7.20
INC VAT
£6.00 EX VAT
Stainless steel exhaust stud nut, this is a less expensive alternative to the genuine nut
More than 5 in stock
31121880-z 31121880 GU31121880 31 12 18 80
3112 1880 3112.1880 31.12.18.80
£1.40
INC VAT
£1.17 EX VAT
A2 stainless socket cap button head screw M6 x 16mm
More than 5 in stock
£0.80
INC VAT
£0.67 EX VAT
M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
Availability varies on this part, check availability
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£7.00
INC VAT
£5.83 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT
Stainless retaining bolt for oil filter cover
Stainless socket cap
This part is due back in stock soon, call 01484 841395 to reserve yours
27152885 GU27152885 27 15 28 85
2715 2885 2715.2885 27.15.28.85
£3.00
INC VAT
£2.50 EX VAT