Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats
Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.
Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap
More than 5 in stock
£7.80
INC VAT
£6.50 EX VAT
Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head
Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.
More than 5 in stock
887483 MG887483
£7.50
INC VAT
£6.25 EX VAT
Handy 70g tube of copper grease anti-seize paste
Use to prevent threaded studs, nuts and bolts form seizing
Please note this part CANNOT be posted outside of the UK mainland area
1 in stock
£7.20
INC VAT
£6.00 EX VAT
M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
Availability varies on this part, check availability
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£7.00
INC VAT
£5.83 EX VAT
Brilliant chrome, aluminium and metal polish.
Make your Guzzi gleam.
1 in stock
£6.50
INC VAT
£5.42 EX VAT
A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models
Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230
4 in stock
01659230 GU01659230 01 65 92 30
0165 9230 0165.9230 01.65.92.30
£6.10
INC VAT
£5.08 EX VAT
Rocker cover screw kit containing 12 replacement stainless steel socket cap bolts for two valve small twin rocker covers. Only one kit required per engine. Only for twin throttle body V7 models
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted. This kit contains the correct screws for the Breva 750 and 2004 on V7 models but does not include the two flanged M5 screws SSA81523 that fasten the rocker cover covers to the rocker cover (on models other than the V7 Racer)
More than 5 in stock
£5.00
INC VAT
£4.17 EX VAT
Stainless steel hose clamp, various applications
Used to clamp inlet manifold (FUA19114) on Nevada (pre 2004), V65, V65 Florida, Lario, Monza and V50 3
More than 5 in stock
93305032 GU93305032 93 30 50 32
9330 5032 9330.5032 93.30.50.32
£3.90
INC VAT
£3.25 EX VAT
Stainless steel after market exhaust stud
M6 exhaust stud. See ENA31881 for stud nut. Note that unlike the originals these studs are threaded along their entire length.
More than 5 in stock
96506042 GU96506042 96 50 60 42
9650 6042 9650.6042 96.50.60.42
£3.60
INC VAT
£3.00 EX VAT
Stainless steel M5 flanged screw, many applications
Used for retaining bodywork
5 in stock
AP8152302
£3.00
INC VAT
£2.50 EX VAT