Shop headings: New Spares | Used Spares | Accessories | Brands
"The Carburettor Manual" is a comprehensive guide from Dellorto to the setting up and use of tapered needle motorcycle carburettors. Covers principle of operation of all Dellorto tapered needle carburettors 1970 onwards. 33 pages with colour pictures and diagrams. Also included is the original Dellorto "Tuning Guide 1.1" for carburettors, which gives advice on the choice, setting and use of a Dellorto tapered needle carburettor which includes colour carburettor cross sections showing the multiple stages of carburettor operation. Also contains float height and tapered needle selection tables.
3 in stock
£22.00
(VAT exempt)
£22.00 EX VAT
Aluminium crush washer for large sump drain and filler plugs (big twins)
We advise changing this at every oil change. Can be used in place of Guzzi ref. 90714195
More than 5 in stock
95100709 GU95100709 95 10 07 09
9510 0709 9510.0709 95.10.07.09
£1.00
INC VAT
£0.83 EX VAT
Aluminium crush washer
Various applications e.g. tacho drive plug seal models with electronic tacho or without tacho, oil line seal on Cali 1100 breather, oil pressure switch adapter on small twins and sump plug on V11 Sport. Also known as Guzzi ref. 95100602. Can be used in place of Piaggio ref. 287174
More than 5 in stock
10154200 GU10154200 10 15 42 00
1015 4200 1015.4200 10.15.42.00
£0.80
INC VAT
£0.67 EX VAT
Aluminium crush washer for sump drain plug
We advise changing this at every oil change
More than 5 in stock
831393 MG831393
£1.00
INC VAT
£0.83 EX VAT
Drive box filler crush washer
We advise changing this at every oil change. This may be supplied as a copper or aluminium crush washer, both are equally effective. Also known as Guzzi ref. 224566
More than 5 in stock
90718120 GU90718120 90 71 81 20
9071 8120 9071.8120 90.71.81.20
£0.90
INC VAT
£0.75 EX VAT
Handy 70g tube of copper grease anti-seize paste
Use to prevent threaded studs, nuts and bolts form seizing
Please note this part CANNOT be posted outside of the UK mainland area
1 in stock
£7.20
INC VAT
£6.00 EX VAT
Single 100cm length of pipe used for oil return and breather applications depending on model. Can be used as gearbox breather on Tonti 5 speed gearboxes
Use hose clip FUA00004
More than 5 in stock
823956080
£8.00
INC VAT
£6.67 EX VAT
Brilliant chrome, aluminium and metal polish.
Make your Guzzi gleam.
1 in stock
£6.50
INC VAT
£5.42 EX VAT
1 litre of Agip SAE 7.5W fork oil. Eni Fork Oil 7.5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired.
As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required.
Eni Fork Oil 5W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.
This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.
The corrosion-resistant properties of Eni Fork Oil 5W allow effective protection of surfaces against corrosive phenomena.
Eni Fork Oil 5W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name
More than 5 in stock
£14.00
INC VAT
£11.67 EX VAT