Shop headings: New Spares | Used Spares | Accessories | Brands
This section contains fuel pipes, carb overhaul kits, carb and injection system spares, fuel filters and inlet rubbers
Complete fuel pump assembly including the plate that mounts to the fuel tank
This part is available by special order, request a quote
32107260 GU32107260 32 10 72 60
3210 7260 3210.7260 32.10.72.60
£898.00
INC VAT
£748.33 EX VAT
The Power Commander is a fuel injection and ignition timing (on some models) adjustment unit that plugs "inline" with the bikes' stock ECU. The Power Commander uses original equipment style connectors so that no splicing or cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5 minutes. Changes are made to the bikes fuel and ignition curves via the Power Commander's onboard microprocessor. Using this technology we are able to offer a large area of adjustment without making any permanent changes to the bikes' ECU (electronic control unit). Removing the Power Commander returns the bike to its previous stock condition. The Power Commander can be ordered preprogrammed with a your choice of several settings, based on the modifications to your bike. The unit also comes complete with software and cable link that allows you to change between different maps or make adjustments to a map file.
This is for V7 models with twin throttle bodies, it is not compatible with single throttle body models
This part is available by special order, request a quote
£455.00
INC VAT
£379.17 EX VAT
Complete black left hand PHBH30 carb, supplied ready to fit with cable elbow
Jetted to suit your model.
42mm Plain air intake connection.
36mm rubber sleeve type engine connection.
Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 300710715 and 23112671
This part is available by special order, request a quote
300710757
£185.00
INC VAT
£154.17 EX VAT
Complete black right hand PHBH30 carb, supplied ready to fit with cable elbow
Jetted to suit your model.
42mm Plain air intake connection.
36mm rubber sleeve type engine connection.
Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 300710715 and 23112671
This part is available by special order, request a quote
300710756
£185.00
INC VAT
£154.17 EX VAT
Fuel injector
Genuine Marelli part
Order now and we will post your order within 7 days.
32115710 GU32115710 32 11 57 10
3211 5710 3211.5710 32.11.57.10
£150.00
INC VAT
£125.00 EX VAT
This adjustable fuelling modifier uses the lambda sensor signal to the ECU. By modifying that signal it achieves an improvement in low and midrange throttle response. Comes with wiring harness and instruction manual, installation is simple and does not require any specialist tools. Suitable for all single throttle body V7, V9 and V85 TT models.
Rapid Bike EASY: A base level simple plug and play modulator equipped with a microprocessor managing the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate power gaps typical of the low and medium rpm range.
See installation instructions here.
1 in stock
£149.00
INC VAT
£124.17 EX VAT
High performance aluminium velocity stack for airbox to throttle body union on single throttle body models. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is due back in stock soon, call 01484 841395 to reserve yours
£140.00
INC VAT
£116.67 EX VAT
The BoosterPlug is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.
The BoosterPlug features a unique technology to provide your bike with a controlled fuel enrichment in all ambient temperature situations. No other Plug and Play device does this. A richer mixture is provided only when needed i.e at low RPMs and when accelerating. On open roads at a constant speed the Boosterplug sits idle to keep fuel consumption low.
Make your bike run as it should have done from the factory!
1 in stock
£129.00
INC VAT
£107.50 EX VAT
TPS for throttle body on 2 valve/cylinder models
Order now and we will post your order within 7 days.
05112830 GU05112830 05 11 28 30
0511 2830 0511.2830 05.11.28.30
£120.00
INC VAT
£100.00 EX VAT
K&N high performance air filter, flat paper cartridge type for single throttle body models
1 in stock
AP8104924
£70.00
INC VAT
£58.33 EX VAT